How To Use Demco Autoslide 5th Wheel Hitch 6077 on a 2020 Chevy Silverado 2500 with Pucks

Question

Question:

i HAVE A 6077 18K DEMCO 5TH WHEEL HITCH WHAT 5TH WHEEL OEM PUCK SYSTEM ADAPTER FOR A 2020 2500HD CHEVY SILVERADO DO I NEED

asked by: Michael J

0

Expert Reply:

In order to use the Demco Autoslide 5th Wheel Hitch 6077 on a 2020 Chevrolet Silverado 2500 you'll need the Demco 5th Wheel Rail Adapter for Chevy/GMC OEM 5th Wheel Towing Prep Package part # DM6333. The adapter will simply drop into the puck system and then provide a set of industry standard above bed rails to attach the fifth wheel hitch too.

expert reply by: Conner L

0

Answer 1

Unfortunately, we have not had a chance to install the Demco Hijacker Autoslide Locking Plate part #DM6025 yet. However, I have attached a photo of the product installed for you in addition to the instructions which list each step with a photo.…

view full answer...

Answer 2

To replace the legs on your Demco Sliding 5th Wheel Hitch you will want the Replacement Side Plates for Demco Autoslide 5th Wheel Trailer Hitch item #DM49GV. This fits the puck pattern on 2020 - 2023 GM Trucks. These legs work with item #DM79GV and…

view full answer...

Answer 3

The head of the Hijacker hitches by Demco like part #DM8550037 are pretty easy to remove. When the Demco rep came here to show us these hitches we went out and watched him install and remove the head of a Hijacker to allow the hitch to easily get…

view full answer...

Answer 4

I attached a picture that shows the install instructions for the Demco Capture Plate part #DM6025 that you referenced.

view full answer...

Answer 5

The Demco Hijacker Autoslide Fifth Wheel Trailer Hitch #DM8550034 installs onto industry standard rails. The only issue with removing the hitch from your truck is that it's heavy. The head itself is approximately 40 pounds and base is around 200…

view full answer...

Answer 6

Yes, the Demco Hijacker Autoslide 5th Wheel Trailer Hitch #DM8550041 referenced in your question is compatible with the MOR/ryde pin boxes. You will just need to add the Locking Plate #DM6025. This locking plate is designed specifically for the…

view full answer...

Answer 7

If your 2020 Chevy 2500HD has the factory tow package with OEM puck system then any hitch made for the CHEVY puck system will have legs that drop right into the pucks in the bed of your truck. If you have a hitch not specifically made for the Chevy…

view full answer...

Answer 8

Hey Rob, I can help you get what you need for your 2020 GMC Sierra 2500 to install the Demco #DM6077 hitch. I assume when you say "no mounting" that you don't have the side plates for the hitch, or the base rails for your truck. So with…

view full answer...

Answer 9

Hey Jeff, since you have the adapter plates already what you would want is the part #DM6077 which is the center section of the hitch minus the adapter plates. The plates you have now would bolt right up to this and you'd be ready to go!

view full answer...

Answer 10

The correct height setting is going to vary by trailer but you can get there taking some measurements. First make sure your trailer is on level ground and then measure from the ground up to the bottom of the king pin. Then on your truck take a…

view full answer...

Answer 11

Hey Justin, I can definitely help with this. I do recommend going with a sliding 5th wheel hitch since your truck is not a long bed. The slider helps with clearance on tight turns. What I recommend is the B&W Companion OEM 5th Wheel Hitch w/…

view full answer...

Answer 12

To install a PullRite SuperGlide 5th Wheel Hitch like item #PUL63RR to the factory puck system of a 2024 Chevy Silverado 3500, you will need the Adapter Rails item #C88KR. This adapter will drop right down into the factory pucks and provide a base…

view full answer...

How To Use Demco Autoslide 5th Wheel Hitch 6077 on a 2020 Chevy Silverado 2500 with Pucks

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching