Demco Autoslide Locking Plate for MOR/ryde Pin Boxes Review Video

I attached a picture that shows the install instructions for the Demco Capture Plate part #DM6025 that you referenced.

Unfortunately, we have not had a chance to install the Demco Hijacker Autoslide Locking Plate part #DM6025 yet. However, I have attached a photo of the product installed for you in addition to the instructions which list each step with a photo.…

What I think you are asking is, how to set-up the hitch with the Rhino Box as the narrow width of the pin box does not engage the capture plates on your Demco Hijacker 5th Wheel hitch. What you are missing is the Demco Hijacker Autoslide Locking…

To verify the Demco Autoslide 5th Wheel Hitch #DM8550024 will work correctly with your 2023 Forest River Salem Hemisphere 36FL I need to know what pin box you have. Some pin boxes like the Lippert Rhino will require a Locking Plate #DM76FR. That and…

The Demco Hijackers like the #DM8550024 do have locking plates on the sides of them to prevent having to use a capture plate for most fifth wheel pin boxes but the MORryde pin boxes have a cut out area on the sides of the pin box to allow for the…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

Yes, Demco does have the 21K Autoslide #DM89GV as well as an 18K Autoslide #DM69GV that will fit the factory prep/puck system in a Ram 2500 or 3500 pickup. If you have one of the following pin boxes you will also need the corresponding accessory to…

Yes, MORryde cushioned pin boxes like #MR84VR can be used with Demco Hijacker Autoslide fifth wheel hitches. There's even a capture plate from MORryde that was designed for this application with the part #DM6025.

I recommend the Demco Hijacker Autoslide 5th Wheel Hitch #DM8550024 for your 2022 Ford F-250. This hitch will drop into the factory prep/puck system and the auto sliding 5th wheel hitch will keep you from having to get out of your truck to reposition…

I spoke to Demco about the Demco Autoslide Locking Plate for Lippert Rhino Pin Boxes part #DM76FR, the side plates are supposed to be angled as that's what provides the clamping force. I would just make sure you have the bolts torqued fully to…

The gears of the 21k Demco Hijacker #DM8550035 are a bit heavier duty than the 18k capacity version #DM8550034 to allow it to have a higher capacity. The lighter duty hitch weighs 276 lbs and the heavier duty version weighs 308 lbs. To install this…

In order to use the Demco Hijacker Autoslide 5th Wheel Trailer Hitch #DM8550034 referenced in your question with the MOR/ryde pin box on your trailer you just need to add the Locking Plate #DM6025. This is designed specifically for this application…