Is Demco Hijacker Autoslide Compatible with MOR/ryde Pin Box

Question

Question:

Will this hitch work with the Moryde Pin Box?

asked by: Al K

0

Expert Reply:

Yes, the Demco Hijacker Autoslide 5th Wheel Trailer Hitch # DM8550041 referenced in your question is compatible with the MOR/ryde pin boxes. You will just need to add the Locking Plate # DM6025. This locking plate is designed specifically for the MOR/ryde pin box and will bolt to it in order to prevent the king pin from rotating inside the Demco Hijacker. All of the necessary hardware is included.

I have attached the installation instructions on this product that you can also take a look at.

expert reply by: Chris R

0

Answer 1

I attached a picture that shows the install instructions for the Demco Capture Plate part #DM6025 that you referenced.

view full answer...

Answer 2

If you are using a Demco manual sliding hitch like the Hijacker Premier #DM6076P-UL-21K then a lube plate like #RP83004 can be used. If you are using the Demco Hijacker Autoslide like #DM8550035 you can only use a lube plate that is a maximum of 3/16…

view full answer...

Answer 3

I attached a diagram and instructions on where and how often to grease the Demco Hijacker part #DM6077 that you have. It's recommended that you use white lithium grease like the part #L11354 for a cartridge for a grease gun.

view full answer...

Answer 4

Since we don't carry the PullRite line I can't really speak to their quality but from what I can see from there website their 2900 model is fairly similar to the Demco Autoslide 5th Wheel Hitch w/ Slider #DM89GV. Both hitches offer 14"…

view full answer...

Answer 5

The Demco Hijacker Autoslide 5th Wheel Hitch w/ Slider - 18k #DM8550024 weighs a total of 304 pounds. I believe you are asking about this hitch for your 2022 Ford F-250 with 6-3/4 ft. bed with OEM prep. Even though the Hijacker is an amazing hitch,…

view full answer...

Answer 6

We don't offer a video, but that's a great idea that I'll suggest to our shop manager. The maintenance procedures for the Demco #DM8550040 Hijacker Autoslide 5th wheel hitch are outlined in the linked owner's manual, but the keeping…

view full answer...

Answer 7

Thank you for all of the information, it really helped to narrow down what you are needing. Typically I would say that you would need a 5th wheel hitch with a height of 13 inches so that your trailer can ride level (52.5 - 39.5 = 13), but since that…

view full answer...

Answer 8

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 9

You would need to reach out to Demco directly to straighten out the mechanics of the hitch and confirm that it's still safe to use. The correct way to measure for hitch height would be to: 1. Level the trailer and measure from the ground to the…

view full answer...

Answer 10

With a 2017 Ford F-350 the Goose Box Pin box replacements do work with the standard bed size. The standard bed has an inside height of 21.1 inches, so you will have adequate clearance with the Goose Box being completely inside your truck bed yet…

view full answer...

Answer 11

Yes, MORryde cushioned pin boxes like #MR84VR can be used with Demco Hijacker Autoslide fifth wheel hitches. There's even a capture plate from MORryde that was designed for this application with the part #DM6025.

view full answer...

Answer 12

The MORryde Cushioned 5th Wheel Pin Box #MR84VR weighs right at 190 pounds. Due to this, it will ship freight. Just in case you needed, this is designed to fit 14,000 to 18,000 pound trailers with the Lippert 1621 and 1621HD pin boxes.

view full answer...

Is Demco Hijacker Autoslide Compatible with MOR/ryde Pin Box

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching