Replacement Hub/Drum and Brake Assemblies for AL KO 4,400 lb Trailer Axle
Published 11/10/2022
Products Featured in This Question
Question:
I have a 2014 keystone sprinter 252fwrls and the part number on my brakes is a 023-026 which is for 3500lb axles and my axle tag says 4.4k. Your website shows the correct brake assembly as K23-462-00 so Im confused at this point. But I need brake assembly and seals or brake assembly and full hub and bearings
asked by: Ricky
Expert Reply:
While your pictures do indicate that you have an AL KO 4,400 lb axle the actual brake assemblies you have is a Dexter 3,500 lb assembly part # 23-26 or for the pair # 23-26-27.
When it comes to replacing your hubs, based off some previous answers it looks like the Trailer Hub and Drum Assembly - 5,200-lb Axles - 6 on 5-1/2 Item # 8-201-5UC3 could be the right replacement for you, but you will want to confirm which bearings are in your existing hubs. This is the most reliable way to determine which replacement hubs will fit on your spindle; if the bearings you find have part # 25580 for the inner and # LM67048 then this hub and drum assembly will work. The bearing kit that would work in these hubs is the Bearing Kit, LM67048/25580 Bearings, 10-36 Seal # BK3-300, which is just the bearings and seals if you don't want to replace the entire hub and drum.
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Shop: Dexter Trailer Hub and Drum Assembly for 5,200-lb Axles - 12" Diameter - 6 on 5-1/2
- Shop: U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7" Long U-Bolts
- Shop: Trailer Axle w/ Electric Brakes - Easy Grease - 6 on 5-1/2 - 86-1/2" Long - 6,000 lbs
- Shop: Dexter Trailer Hub and Drum Assembly - 5,200-lb E-Z Lube Axles - 12" - 6 on 5-1/2
- Shop: Dexter Trailer Hub and Drum Assembly - 5,200-lb Axles - 12" - 6 on 5-1/2
- Shop: Pollak 9-Pole, Round Pin Trailer Connector - Trailer End
- Shop: Pollak Black Plastic, 7-Pole, RV-Style Trailer Connector - Trailer End
- Video: Review of the Suspension Kit for Tandem-Axle Trailers
- Video: Breaking Down the Dexter Trailer Hub and Drum Assembly for 5,200-lb Axles
- Q&A: Do Both Axles On a Tandem Axle Trailer Need To Be The Same Length
- Q&A: Replacement Axle for a 4,400 lbs AL-KO Axle
- Q&A: Do Trailer Spindles Just Weld to End of Axle
- Q&A: Recommended Replacement Axle for an Al-Ko 4.4k Axle
- Search Results: 25580
- Video: Dexter Trailer Hub and Drum Assembly Spec Review
- Video: Let’s Check Out the Dexter Trailer Hub and Drum Assembly
- Q&A: Bearing Kit & Seal For Dexter 031-030-02, 031-032-02 Bearings
- Search Results: 010~054~00
- Search Results: 031~030~02
- Search Results: 031~032~02
- Search Results: 008~201~05
- Search Results: lm67048
- Video: How to Install the etrailer Electric Trailer Brakes on a 2009 Carriage Cameo Fifth Wheel
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison
- Search Results: trailer spindles
- Video: Ultimate Overview of the Dexter Trailer Axle w/ Electric Brakes
- Q&A: Where are Axle U-Bolts Measured From
- Q&A: Longer U-Bolts For 3 Axles For Roadmaster Roadmaster Comfort Ride
- Shop: Ladder Rack