Parts Needed To Change a 10,000LB Equal-i-zer Weight Distribution Hitch to 14,000LBS
Updated 11/09/2022 | Published 11/08/2022
Products Featured in This Question
Question:
I’m looking to convert my 10K Equal-I-zer hitch to a 14k. To do so, do I only need to upgrade the ball, hitch head, and spring bars? Are the sway control brackets the same? My trailer is 12K. Is going up to the 14K hitch a problem? Thanks!
asked by: Mike C
Expert Reply:
You are correct. You will only need the 14,000LB 2-5/16" Hitch Ball # EQ91-00-6140, Head # EQ90-02-1400 and Spring Bars # EQ90-01-1499 to convert your 10,000LB Hitch # EQ37100ET to a 14,000LB Hitch # EQ37140ET. The Sway Brackets # EQ95-01-5600 are going to be the same for the 6,000lb to 14,000lb kits.
The important measurement is going to be the tongue weight for your trailer. The 14,000lb hitch is rated for tongue weights of 1,000-1,400lbs and a trailer less than 14,000lbs. As long as your tongue weight falls into that measurement and your trailer weight does not exceed the maximum capacity it is the correct one for you.
The 1-7/8" 12pt Thin Walled Socket # ALL643216 is needed to install the hitch ball onto the new hitch head.
Product Page this Question was Asked From
Replacement L-Bracket for Equal-i-zer 6,000-lb to 14,000-lb Weight Distribution Systems - Qty 1
- Accessories and Parts
- Weight Distribution Hitch
- Frame Bracket
- Brackets
- Equal-i-zer
- L-Bracket
- Equal-i-zer
more information >
Continue Researching
- Q&A: Replacement Parts for Curt TruTrack Weight Distribution System # C17500
- Q&A: Replacement Spring Bar Support Bracket for Curt TruTrack Weight Distribution System
- Q&A: Troubleshooting Curt Trutrac System Digging Into Brackets
- Search Results: weight distribution hitch
- Search Results: curt weight distribution hitch
- Search Results: curt weight distribution hitch parts
- Shop: Replacement Sway-Control L-Bracket for Fastway e2 Weight Distribution Systems - 6,000 to 12,000 lbs
- Video: Curt Weight Distribution C17508 Review
- Shop: Replacement L-Bracket for Equal-i-zer 6,000-lb to 14,000-lb Weight Distribution Systems - Qty 1
- Shop: Frame Brackets for Curt TruTrack Weight Distribution System w/ Sway Control - 10" Frames
- Shop: Replacement L-Pins and Clips for Curt TruTrack Weight Distribution System w/ Sway Control - Qty 2
- Shop: Replacement Frame Brackets for Curt TruTrack Weight Distribution System w/ Sway Control
- Shop: Replacement L-Bracket Plates for Blue Ox TrackPro and 2-Point Weight Distribution - Qty 2
- Shop: MORryde RV Cargo Slide Tray - 70" x 23" - 2 Way Slide - 80 Percent Extension - 500 lbs
- Search Results: rv solar panels
- Search Results: portable solar panel
- Search Results: rv sewer hoses
- Video: TowSmart Folding 4-Way Lug Wrench Spec Review
- Video: The Low-Down on the TowSmart Folding 4-Way Lug Wrench
- Video: All You Need to Know About the Lug Wrench with SAE and Metric Sockets
- Q&A: Difference Between 2-Point and 4-Point Sway Control on Weight Distribution Systems
- Search Results: equalizer bracket
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: 5 Things to Know About Weight Distribution Hitches
- Video: A Closer Look at the Inner Link Plate for Equal-i-zer Sway Control Bracket
- Video: All You Need to Know About the Outer Link Plate for Equal-i-zer Sway Control Bracket
- Video: Hands-On with the Inner Link Plate for Equal-i-zer Sway Control Bracket
- Q&A: Are The Fastway L Brackets And The Equalizer L Brackets The Same
- Q&A: Is A Curt Weight Distribution Hitch Compatible With Fastway Frame Brackets
- Q&A: Replacement Bars for an Equalizer Hitch, 14,000 to 10,000 Solution
on Accessories and Parts
