Replacement Hub Recommendation for 2,200 lb Motorcycle Trailer Axle with 5 on 4-1/2" Bolt Pattern
Published 11/03/2022 >
Question:
In need of replacement hubs for a Tritan motorcycle trailer I just bought. The tag on the axle shows a SN 34208-16. Tritan number on this tag is 209400-1 rated at 2200 lbs. it has 175/80-13 inch wheels. Please help find the right replacement hub. The hubs on this trailer have ears and one has broken off. It is a 5-4.5 lug pattern. Hope this help Thanks
asked by: Jeff W
Expert Reply:
Thanks for all of the info!
From the information you gave me it sounds like you're needing the Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2 # 8-259-50UC1, but I do recommend pulling your hub and checking the part numbers on the bearings and seal or measuring the spindle where the bearings and seal ride to make sure it fits.
Here are the bearings and seal used for this hub:
Inner and outer bearings - L44649 (1.063" inner diameter)
Grease seal - 10-9 (1.5" inner diameter and 1.987" outer diameter)
If you have something else please let me know! I've attached a sample review video for you to check out.
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Idler Hub
- Standard
- L44649 / L44649
- Marine Grade
- For 2200 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 11 Inch Wheel
- 12 Inch Wheel
- 8 Inch Wheel
- 9 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: trailer hub
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized
- Shop: Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: Trailer Hub Assembly - 2,200-lb E-Z Lube Axle - 5 on 4-1/2 - 13" - 15" Wheels - Galvanized
- Shop: Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2 - Galvanized
- Article: Most Popular Wheel Bearings
- Shop: Replacement Bearing Kit with Bearings L44649, Races L44610, Seal 10-9 - Fits 1.063" Spindles
- Search Results: led light trailer lights
- Video: Detailed Breakdown of the Dexter Trailer Idler Hub Assembly for 2,200-lb Axles
- Video: What to Know About the Trailer Hub Assembly
- Video: Feature Review LED Combination Tail Light Kit for Trailers under 80" Wide
- Q&A: Recommended Galvanized Hubs For Utility Trailer Used For Aluminum Boat Launching
- Q&A: Availability of Hubs that Fit 2,200 lb Lippert Axle Spindles
- Q&A: Trailer Hub that Fits Axle with 2,200 lb Capacity with 5 on 4-1/2 inch Bolt Pattern
- Q&A: Does Grease Cap Included with # 8-258-50UC1-EZ Hub Act Like A Bearing Buddy
- Q&A: 5 Lug Hub That Can Fit Spindle with BTR Dimensions
- Shop: Kenda Loadstar 5.30-12 Bias Trailer Tire with 12" White Wheel - 5 on 4-1/2 - Load Range C
- Video: Breaking Down the D Washer for EZ Lube Spindles
- Video: Detailed Breakdown of the Replacement Spindle Washer
- Video: Spindle Nut Kit for EZ Lube Axles: The Breakdown
- Video: All You Need to Know About the Dexter Trailer Idler Hub Assembly
- Search Results: tang washers
- Search Results: dexter hub 8 258
- Q&A: Replacement Hub and Bearings for 1989 Tracker Boat Trailer
- Q&A: Why Do Some Spindles Use Cotter Pins and Others Use a Tang Washer?
- Search Results: trailer hitch ball mount
- Search Results: straight tongue trailer coupler
- Search Results: trailer hitch
- Article: Trailer Wiring Diagrams



