Do I Need to Have a Castle Nut or Cotter Pin to Keep Spindle Nut From Backing Off
Updated 04/28/2025 | Published 09/06/2022
Question:
i replaced my bearings on my 1993 bass tracker boat trailer, and i found that there are no castle nuts or cotter pins anywhere. the only thing that i found was a thin metal washer the same diameter of the bearing and the nut. is this correct or do i have to worry about the nut coming off
asked by: GARY
Expert Reply:
If you only have the nut and a washer but no cotter pin or retaining type washer on the end then that isn't correct and you want to get a piece to help prevent that nut from backing off. If you have a setup like the Spindle Nut Kit for EZ Lube Axles # RG05-100 with the weird looking washer on the outside then that is okay because the weird washer is designed to help keep the nut in place.
Let me know if you're needing something to secure it and I can help you with the correct part if you can let me know what diameter spindle you have.
Wayne
4/23/2025
Castle nut has a pin but it's not a cotter pin,how do I get it out
Product Page this Question was Asked From
Spindle Nut Kit for EZ Lube Axles
- Accessories and Parts
- Trailer Spindles
- Spindle Nut
- 1 Inch I.D.
- Redline
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: trailer hubs and drums
- Search Results: boat trailer disc brakes
- Search Results: surge brake lines
- Search Results: ez lube trailer hubs and drums
- Search Results: disk brakes
- Search Results: castle nut
- Shop: Spindle Nut Kit for EZ Lube Axles
- Search Results: electric disk brakes
- Shop: CE Smith U-Bolt Kit for Mounting 2" Square Trailer Axles - 4-1/2" Long U-Bolts - Zinc
- Shop: Terran Industries 4-Leaf Double Eye Spring for 3,500-lb Trailer Axles - 25-1/4" Long
- Shop: DeeMaxx Disc Brake Kit w/ Actuator for Triple Axle Trailers - 10" Hub/Rotor - 5 on 4-1/2 - 3.5K
- Q&A: Method for removing and Installing Tang-Style Spindles Washers
- Shop: Trailer Hub Assembly - 2,200-lb E-Z Lube Axle - 5 on 4-1/2 - 13" - 15" Wheels - Galvanized
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Video: Detailed Breakdown of the Replacement Spindle Washer
- Q&A: What is Difference Between Trailer Bearings L44649 vs L44643
- Q&A: Replacement Disc Brakes for Tie-Down Engineering Hub With 5 on 4-1/2" Bolt Pattern
- Q&A: How to Find Correct Replacement Braking Assemblies for a 1989 EZ Loader Trailer
- Video: Kodiak Disc Brakes Spec Review
- Q&A: Torque Specs for 3500-lb 5-on-4-1/2 Dexter Hub/Drum 84546UC3
- Video: What to Know About the etrailer Rust-Resistant 4-Leaf Double Eye Spring for 3.5K Trailer Axles
- Video: Comprehensive Review: Grease Seal
- Video: Review of Lippert Trailer Axles - Trailer Spindles - LC45RP
- Q&A: Hitch and Thule Goalpost Recommendation for a 2008 Toyota Tacoma
- Q&A: What Info is Needed to Add Surge Brakes to a Trailer
- Video: Review of CE Smith Trailer Axles - Axle Spindle Parts - CES52QR
- Video: What to Know About the Trailer Hub Assembly
- Shop: Trailer Wiring
- Article: Trailer Wiring Diagrams
on Accessories and Parts
J T.
3/21/2024
Spindle size 1-1/16