V-Bar Tire Chains that Fit Tire Size 285/75R17

Question

Question:

I have a 2009 Dodge Ram 2500, with 285/75R17 tires. These tires are not included in the list of tires which these chains fit. Do you sell the size that would fit this tire?

asked by: Dan F

0

Expert Reply:

For a similar set of V-bar tire chains that fit your tire size of 285/75R17 you'd want the Titan tire chains part # TC3829CAM which will do a great job in snow and ice due to the v-bars.

expert reply by: Jameson C

0

Answer 1

For heavy snow and ice on inclines you're going to want a set of chains that really dig in, I recommend the Titan Chain Heavy Duty Alloy Snow Tire Chains w Cams #TC74FR. These chains use square links that will give you great traction for…

view full answer...

Answer 2

Due to the aggressive tread pattern on your 285/60-20 tires on your 2019 Ram 2500, you'll want to use a wide-base type tire chain that adds a little extra space to accommodate the tread pattern on an off-road style tire. For good all-around…

view full answer...

Answer 3

Some newer cars, vans and small trucks, especially those with large, aftermarket tires, may require the use of Class S chains. Class S tire chains are designed for use on vehicles with restricted wheel well clearance. I have attached a photo that…

view full answer...

Answer 4

There actually isn't a difference because both the Titan Chain Snow Tire Chains #TC3829 and Titan Chain Snow Tire Chains w/ Cams #TC3829CAM are only for on road use and not off-road use.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 10

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 11

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

V-Bar Tire Chains that Fit Tire Size 285/75R17

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching