Recommended Portable Fire Pit That Works With The Ignik FireCan Fire Pit Rocks

Question

Question:

Hi, I am looking for a portable fire pit for the fire pit rocks? Do you have that

asked by: Alex W

0

Expert Reply:

Yes, we sure do!

For your Ignik FireCan Fire Pit Rocks # GN47FR, you can use the Ignik FireCan Portable Fire Pit with 5' Hose - Propane # GN24FR.

This is a portable fire pit that works great with the Ignik FireCan Fire Pit Rocks # GN47FR, measures 7-1/8" long, 15-1/4" wide, 11-3/8" tall and includes a quick-connect hose with Type 1 fitting and adjustable regulator.

expert reply by: Bryce D

0

Answer 1

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Answer 4

Hey Tim welcome back! Your ARH15AACBL2 GE AC unit has the old 410a refrigerant in it so the GE Appliances item #GE64FR you were looking at isn't going to work as a replacement. The EPA mandated R32 refrigerant has been used in all new AC's…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 9

Hi Cayton; the only thing you can do at this point is upgrade the factory sway bar. You can replace the rear with the Roadmaster Rear Anti-Sway Bar - 1-3/8" Diameter #RM94GR. The Roadmaster #RM47VR can replace the front. Other suspension…

view full answer...