1995 Coleman Utah Replacement Leaf Springs Needed
Published 10/17/2022 >
Products Featured in This Question
Question:
Hi, I am hoping you can help. We have a new to us 1995 Coleman Fleetwood Utah pop-up camper. We cannot get the wheel off to replace the brakes which we will be purchasing from etrailer if we can ever get the tire off. It has been suggested that the issue is flattened leaf springs. So that begs the question of a replacement part for Coleman part 4735CC201. Do you have anything that matches that part? Attaching page from the manual. Thanks in advance.
asked by: Kimmie
Expert Reply:
The most I was able to find about the Coleman 4735CC201 leaf spring is that it's rated for 1,000 lbs which means it goes to a 2,000 lb axle. For that application we have the 4-Leaf Slipper Spring w/ Radius End # e69SR which measures 25-4/8" long from the center of the eye to the end of the spring itself. If you use a jack to raise your trailer by the frame you will be able to get under the trailer to measure the leaf spring without it being compressed and compare that to our length.
Something else you might consider is replacing your entire axle system with the Timbren Axle-Less Kit # ASR2000S02 so that you can ditch your old equipment and not have to worry about getting exact replacements. This will make it easier than finding parts for an (almost) 30 year old trailer plus the individual rubber springs give the trailer better ride control.
If you do choose to go this route then you can use the self-adjust brakes # AKEBRK-35-SA and replacement hub # AKHD-545-35-EZ-K for a totally renovated suspension system.
Attached are some review videos for you to check out.
Product Page this Question was Asked From
4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles - 24-5/8" Long
- Trailer Leaf Springs
- Slipper Springs
- 9/16 Inch Eye
- Nylon Bushings
- 2000 lbs
- 1-3/4 Inch Wide
- 4 Leaf
- 24-5/8 Inch Long
- Standard Grade
- etrailer
more information >
Featured Help Information
Miscellaneous Media




Continue Researching
- Search Results: trailer suspension parts
- Shop: 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles - 24-5/8" Long
- Search Results: trailer leaf springs
- Shop: Spring-Eye Bolt with Locknut for Slipper Springs - 3-1/2" Long
- Video: Timbren Axle-Less Trailer Suspension System Test Course
- Shop: Spring-Eye Bolt with Locknut for Slipper Springs - 4" Long
- Shop: Trailer Idler Hub Assembly for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Video: In-Depth Review of the Easy Grease Trailer Idler Hub Assembly for 3.5K Axles
- Video: Comprehensive Review: Grease Seal
- Shop: 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles - 24-1/4" Long
- Shop: CE Smith U-Bolt Kit for Mounting 2" Square Trailer Axles - 4-1/2" Long U-Bolts - Zinc
- Shop: Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Video: Complete Breakdown of the Timbren Axle-Less Trailer Suspension w/ Idler Hubs
- Q&A: Availability of Equalizers for Trailer Suspensions
- Q&A: How to Find Replacement Axle for Karavan Boat Trailer
- Q&A: Adding Electric Brakes to Northern Tool UltraTow 5x8 Aluminum Frame Trailer
- Q&A: Recommended 3500 lb Axle with Idler Hub Assembly And EZ-Lube Spindles
- Article: Where to Position the Trailer Axle?
- Search Results: leaf springs
- Q&A: Replacement Slipper Spring For a Boat Trailer With 4-Leaf Spring 25.5" Long
- Video: In-Depth Review of the Easy Grease Trailer Idler Hub Assembly for 2K Axles
- Video: In-Depth Review of the Shackle Bolt for 1-3/4" Wide Double Eye Springs
- Video: What to Know About the Trailer Hub Assembly
- Q&A: U-Bolt Kit for Smaller Round Axle on Jet Ski Trailer
- Q&A: Replacement Idler Hub For a 2017 Triton LTWCI-T Boat Trailer With 2,000LB Trailer Axle and Knott Hub
- Search Results: marine bearing grease lubricants sealants adhesives
- Search Results: akihub~545~2~g~ez~2k
- Search Results: bk1~150
- Search Results: nylon bushing


