Troubleshooting Kwikee 25 Steps Not Fully Retracting Without Manual Assistance

Question

Question:

Hi, My Kwikee 25 steps no longer fully retract without manual assistance. Do I simply need to replace the motor PN 369506 or are other measures needed? Thx

asked by: Preston R

0

Expert Reply:

Since your Kwikee 25 steps won't fully retract on their own it is either the motor or the gear. You will need to inspect the teeth on the gear to see if any are missing. If they are, then you need the # LC369354. If teeth are in good condition then it is the motor and you will need to replace it with the # LC369506.

expert reply by: Robin H

0

Answer 1

Thank you for the picture and part number of your Kwikee steps. Since we know you have the Kwikee Series 25 steps the correct part you need is the part #LC369354.

view full answer...

Answer 2

Hey Steve the small gear that is on motor 1820124, which is the Lippert Components Kwikee Step Motor for 25 Series item #LC369506 has not been made available as a separate replacement part. If that gear is damaged on your Kwikee 25 Series you would…

view full answer...

Answer 3

Hi Les, With the teeth being chewed up the sensor in the steps probably isn't getting the signal that the steps are closed because it isn't fully turning, causing the steps to keep puling in even though they are 99% in. The motor and…

view full answer...

Answer 4

Hi Richard! I contacted Lippert to make sure, and the Kwikee Replacement Entry Step Gear for Kwikee 24 and 25 Series Electric RV Steps #LC369354 is indeed made by Lippert right here in the U.S. of A! What kind of trailer do you have these steps on?

view full answer...

Answer 5

The only parts list for your triple step is attached. It unfortunately does not give the breakdown to the extent you are seeking with Teflon plate and wave washer as those parts are not replacement options from the manufacturer. I've attached the…

view full answer...

Answer 6

The Replacement Motor with Gear and Table for Kwikee 24 and 25 Series Electric RV Steps #LC369529 is the only way I can find Lippert offers the nylon supports for the Step Gear #LC369354.

view full answer...

Answer 7

Hey Aaron, To replace your Kwikee 25 Series sawtooth gear you'll need part #LC369354. As for the arm, the eyelets on the arm allow it to droop like you're seeing so that the gear can move back and forth without binding so it's not a cause…

view full answer...

Answer 8

We have that part available in a kit. You will need the Replacement Motor with Gear and Table for Kwikee 24 and 25 Series item #LC369529. This kit includes the gear item #LC369354 that you referenced as well.

view full answer...

Answer 9

Sounds like you are looking for the Replacement Self-Lubricating Bushing for Lippert Electric Coach Step #LC116531 which does not come with the gear part #LC369354 that you referenced.

view full answer...

Answer 10

According to Roadmaster, you'll need the #RM-910003-60 Rebuild Kit for Falcon 2 Towbars. I'll link you to the instructions, which are actually the owner's manuals for the Falcon 2 towbar. The manuals contain exploded drawings that show…

view full answer...

Answer 11

The repair kit that you will need for your Falcon 2 Tow Bar, #RM-520, is the Locking Pin Repair Kit, #RM-910003-80. The Autowlok feature on your tow bar is not engaging, so this repair kit will replace the inner locking mechanism which includes the…

view full answer...

Answer 12

Your memory does serve you right and both arms on your Roadmaster Falcon 2 #RM-520 are designed to "lock up" as this is not a non-binding tow bar; whether or not they've been able to get the arms to lock without performing the two sharp…

view full answer...

Troubleshooting Kwikee 25 Steps Not Fully Retracting Without Manual Assistance

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching