Where Is The Kwikee Replacement Entry Step Gear LC369354 Made?

Question

Question:

Is this LC 369354 gear plate an original OEM part manufactured by Lippert or manufactured by a different company??

asked by: Richard M

0

Expert Reply:

Hi Richard!

I contacted Lippert to make sure, and the Kwikee Replacement Entry Step Gear for Kwikee 24 and 25 Series Electric RV Steps # LC369354 is indeed made by Lippert right here in the U.S. of A!

What kind of trailer do you have these steps on?

expert reply by: Lazer S

0

Rick

7/17/2025

Thx Lazer. I ordered the step gear plate today for my 2017 Forest River FR3 25DS class A motorhome. Your help is very much be appreciated.

Lazer S.

7/18/2025

@Rick Cool RV! Looks cozy. Any more trips planned for the summer?

Answer 1

The only parts list for your triple step is attached. It unfortunately does not give the breakdown to the extent you are seeking with Teflon plate and wave washer as those parts are not replacement options from the manufacturer. I've attached the…

view full answer...

Answer 2

Since your Kwikee 25 steps won't fully retract on their own it is either the motor or the gear. You will need to inspect the teeth on the gear to see if any are missing. If they are, then you need the #LC369354. If teeth are in good condition…

view full answer...

Answer 3

The Replacement Motor with Gear and Table for Kwikee 24 and 25 Series Electric RV Steps #LC369529 is the only way I can find Lippert offers the nylon supports for the Step Gear #LC369354.

view full answer...

Answer 4

Hey Aaron, To replace your Kwikee 25 Series sawtooth gear you'll need part #LC369354. As for the arm, the eyelets on the arm allow it to droop like you're seeing so that the gear can move back and forth without binding so it's not a cause…

view full answer...

Answer 5

Sounds like you are looking for the Replacement Self-Lubricating Bushing for Lippert Electric Coach Step #LC116531 which does not come with the gear part #LC369354 that you referenced.

view full answer...

Answer 6

We have that part available in a kit. You will need the Replacement Motor with Gear and Table for Kwikee 24 and 25 Series item #LC369529. This kit includes the gear item #LC369354 that you referenced as well.

view full answer...

Answer 7

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 8

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 9

Hey Donny! For your Dometic Penguin/Brisk Air 15,000 BTU AC model B59516.711C0-MX, the correct soft start is the #DMC93JF. This is designed for Dometic Brisk II electronic air conditioner units with in-wall thermostats.

view full answer...

Answer 10

That’s a great question Chadwick, and this is one of those situations where the change in technology really matters. The GE Appliances Low-Profile RV AC w/ Heat Pump part #GE26RR will replace your current ARC13AACBL2 setup, but it’s important to know…

view full answer...

Answer 11

Hey John! You weren't finding that SolidStep because Lippert discontinued it in 2024 and that table wasn't updated to reflect this. What I recommend instead is the MORryde StepAbove RV Steps #MR26RR. These are designed to fit 23-3/4" to…

view full answer...

Answer 12

Appreciate you reaching out Juan! Lippert confirmed that your LCI number is a 1621 pin box. Rota-Flex 5th Wheel Pin Box #LC328330 is going to be a direct replacement and bolts right on. The Rota-Flex pin box is highly rated because it has a pivoting…

view full answer...

Where Is The Kwikee Replacement Entry Step Gear LC369354 Made?

Product Page this Question was Asked From

Continue Researching