Trailer Hitch for a 2022 Ford Bronco That Helps Clear the Spare Tire on the Back

Question

Question:

Need a hitch for my 2022 Ford Bronco, thanks

asked by: Loren

0

Expert Reply:

For your 2022 Ford Bronco, you can use the Draw-Tite Max-Frame Trailer Hitch Receiver # DT37GR. This hitch will provide you with a 2" hitch receiver which is the most common size used for hitch mounted accessories such as bike racks, cargo carriers and ball mounts. But this hitch also extends further out, allowing you to use those accessories with your spare tire on the back of your Bronco.

If you plan to do any towing, you can round out a tow package by adding the etrailer Ball Mount Kit # 989900 and one of the following 4-way wiring kits depending on if you have the LED taillights or not.

LED Taillights
- T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # TK99VR

Without LED Taillights
- T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # TK33VR

expert reply by: Scott S

0

Answer 1

You are correct, both the Curt #C87BR and Tekonsha #TK33VR harnesses will both fit your 2022 Ford Bronco with incandescent tail lights. Both are custom fit and will connect in line of your factory tail lights. They both include the additional wiring…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 7

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Trailer Hitch for a 2022 Ford Bronco That Helps Clear the Spare Tire on the Back

Featured Help Information

Miscellaneous Media

Continue Researching