Replacement Hub And Rotor Assembly For A 2008 Shorelandr Boat Trailer

Updated 09/26/2022 | Published 09/24/2022

Products Featured in This Question

Dexter 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Zinc - 3,500 lbs

(65)

$172.43

Replacement Race for L44643 and L44649 Bearings

(1303)

$5.15

Replacement Trailer Hub Bearing - L44649

(2189)

$23.90

Replacement Race for L68149 Bearing

(1303)

$4.71

Replacement Trailer Hub Bearing - L68149

(2189)

$19.67

Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2

(2869)

$8.70

Question:

Hello I own a 2008 Shorelandr boat trailer manual number 800.859.3028 Frame LUXR30BLW. I am looking for a complete Rotor Assemble The part number is 4410291

asked by: Peter C

Expert Reply:

After doing some research it seems that your 2008 Shoreland'r boat trailer has a 3,500 pound weight capacity so The Dexter 10 inch Hub-and-Rotor Assembly # K08-435-05 would work for you. Your axle should have an axle sticker or plate on the axle that will inform of you the weight capacity.

The bearings are sold separately so you will have to get The Inner Bearing # L68149 and The Outer Bearing # L44649. If your axle does not have an axle sticker or plate located on it if you pull off your existing inner and outer bearings to see if the numbers mentioned above match yours. If not reach back out to me with your inner and outer bearing numbers and I will be able to find you the correct kit.

The Inner Race # L68111 and Outer Race # L44610 and included with the kit. Grease Seal # RG06-050 is sold separately.

This hub has a zinc finish that will protect it against corrosion and wear.

I attached a review video link below.