Replacement Trailer Bearings for Shoreland’r Trailer with #84 Spindle
Updated 02/17/2021 | Published 02/15/2021
Products Featured in This Question
Question:
I want to buy replacement bearings and seal for my 2021 Shoreland’r trailer. It has 4440160, 4440170 bearings, and a 4410130 seal. The spindle is 1-3/8 x 1-1/16”. What is a good way to cross reference these numbers?
asked by: Keith P
Expert Reply:
Based off the measurements you provided, you've got a #84 spindle, so the correct bearings are the # L44649 and # L68149, and # RG06-050 grease seals. We typically try to put bearing numbers of popular manufacturers on the bearing pages but those are Shoreland'r part numbers so they're not on the product pages currently.
You can get these in a complete kit with the Bearing Kit for #84 Spindle, L44649/L68149 Bearings, 10-19 Double Lip Seal # BK2-100
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 3,500-lb Axles - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Continue Researching
- Search Results: 13176
- Search Results: button lights
- Search Results: 70~006
- Search Results: wireless dump trailer remote
- Search Results: dump trailer remote
- Search Results: wireless dump remote
- Search Results: 58910
- Q&A: What Drum do I Need to Replace My Lippert Drum with 696690 Stamped on it?
- Shop: TecNiq T14 Over 80" ID Bar and Load Lamp - Red/White Combo - Surface Mount
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Shop: Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Shop: Uni-Lite LED Clearance and Side Marker Light w Grommet - Submersible - 2 Diodes - Clear Lens - Amber
- Shop: Dexter Trailer Brake Drum for 12,000-lb and 15,000-lb Axles - 12-1/4" x 5" - 8 on 6-1/2
- Shop: Replacement 11" Rotor for Dexter Disc Brakes - 8 on 6-1/2" - 10,000 lbs or 12,000 lbs
- Q&A: Replacement Brake Assemblies for Dexter 023-358-00 Trailer Brakes
- Video: Checking Out the Replacement Bearing Buddy Bras
- Q&A: Replacement for Hub to Fit with Shorelander SS734 Bearing Kit
- Shop: Vehicle Seat Covers
- Video: All You Need to Know About the Replacement Race for L68149 Bearing
- Video: In-Depth Review of the Easy Grease Trailer Idler Hub Assembly for 3.5K Axles
- Video: Complete Breakdown of the CE Smith Trailer Hub Assembly w/ Carrying Case for 3,500-lb Axles
- Q&A: Does the Dexter Trailer Hub and Drum Assembly # 84546UC3 Come Fully Assembled
- Q&A: Hub Replacement for 1974 Prowler Camper with 3500-lbs Axles and 5 on 4-1/2 Bolt Pattern
- Q&A: Recommended Timbren Axle-Less System on a Small Trailer
- Q&A: Replacement Hub for Tie Down Engineering 11033
- Article: Most Popular Wheel Bearings
- Video: The Low-Down on the Powerbuilt Unijack
- Video: All You Need to Know About the Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles
- Shop: Spare Tire Cover