Are There Hubs for a Straight Spindle with 1-1/4" or 1-3/8" Diameter

Updated 04/19/2023 | Published 04/18/2023

Question:

I’m looking for replacement hub assembly/ or bearing, race, seal kit for 1994 ranger single axle trailer. I believe the spindle is 1 1/4” or 1 3/8”, it does not taper. Hopefully the spindle is still okay to use. I also lost the pin, and bearing buddy. Thank you!

asked by: Jacob M

Expert Reply:

I'd love to help but we don't have any hubs for this axle as it's appears very odd and uncommon. The best option we can offer is a new axle.

In order to choose the correct replacement axle for a trailer you'll first want to start with the weight capacity. The weight capacity can be found on the axle tag in the center of the beam. Then, you'll need to measure the hub face (center of hub face to center of hub face) and spring center (center of spring center to center of spring center). This will then give you the info needed to pick out the correct replacement axle for your trailer. I have also attached a video I did to help others with this same thing so be sure to give that a watch.

The Trailer Axle Beam part # e38GR for example is a 3,500 lb axle which measures measures 89" long at the hub face and 74" at the spring center though these can be moved. I have attached a full list of all our other axles you can choose from once you have the info above.

expert reply by: Conner L