Can You Move a TracRac TracOne From a 2009 Nissan Frontier to a 2017 Toyota Tacoma

Question

Question:

I had a TracRac TracOne on a 2009 Nissan Frontier and I want to move it to a 2017 Toyota Tacoma. Can I purchase just the clamps to mount the rack on the Tacoma? Thanks

asked by: Karl H

0

Expert Reply:

It depends on whether your 2017 Toyota Tacoma has the deck rail system or not. It looks like the TracOne for the 2009 Nissan Frontier used either the # TH27000XT for silver or # TH27000XTB for black.

The 2017 Toyota Tacoma also uses the TracOne # TH27000XT for silver or # TH27000XTB for black. But only if you have the deck rail system and you would need the Thule Xsporter Pro and TracONE Ladder Rack Adapter Kit for Toyota Tacoma # THXK4B to use them.

If you do not have the deck rail system, then we do not have a TracOne that fits the 2017 Toyota Tacoma and you would need to use the T-Rac Pro2 Ladder Rack for Toyota Tacoma # TH37005XT.

expert reply by: Scott S

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Thanks for writing in Steve. For the 2023 Nissan Frontier I recommend our etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" #e98869. The weight capacity of this hitch is 500 pound tongue weight, and a 5,000 pound…

view full answer...

Answer 4

Hey Alexander. The Universal Mounting Panel item #331-TPSI-001 is what you'll need to install the control knob of the Redarc Tow-Pro Liberty item #RED53CR in your 2024 Nissan Frontier. It measures 1-8/16" tall x 1-1/8" wide. There are…

view full answer...

Answer 5

Hey Ron. The Redarc Tow-Pro Liberty Brake Controller item #RED53CR will flash blue if it's in sleep mode. It'll be solid blue if your trailer is connected. If it flashes blue and green that shows that the brake controller is calibrating.…

view full answer...

Answer 6

Thanks for the pictures! I have exactly what you are looking for. We have a couple of mounting options for the control knob that can go inside inserts in your Subaru's dash. This will give you a clean factory look install. The Universal Mounting…

view full answer...

Answer 7

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 8

Hello CC, thanks for reaching out. Short answer, no, I wouldn’t mount it inside the battery box. The Tire Linc Pro Repeater #LC67VC is supposed to be mounted in a spot that’s as open and unobstructed as possible, ideally in a front compartment with…

view full answer...

Answer 9

Hey Tony, great question, and you are definitely not alone, this is one of the most confusing parts of towing. The weight of your weight distribution hitch, including the shank and ball mount that slide into the receiver, counts against your truck’s…

view full answer...

Answer 10

Hey Robert, yes the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack w/ Tonneau Cover Adapters #Y01151-5855 that you referenced will fit the T slots of the BAK Revolver tonneau cover that you have. What are you planning on carrying on the…

view full answer...