Product Experts Available Now!
Call 1-800-940-8924
Erickson Clamps for Truck Bed Toppers - 3-3/4" Long x 1-1/4" Wide x 3" Tall - Qty 2
(16 reviews)
Price: $35.10
In Stock
Erickson
Erickson Clamps for Truck Bed Toppers - 3-3/4" Long x 1-1/4" Wide x 3" Tall - Qty 2
Part Number: EM09453
In Stock
$35.10
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (16)
- Q & A (0)
- Videos (1)
- Photos
Erickson Accessories and Parts - EM09453
- Tonneau Cover
- Clamps
- Erickson
This pair of C-clamps helps you secure your hard tonneau cover or camper shell to the side bed rails of your pickup truck. Durable, rustproof aluminum construction. Hardware included.
Features:
- C-clamps help you secure a hard tonneau cover or camper shell to the side rails of your pickup truck bed
- Durable, rustproof aluminum construction
- No-drill installation
- Place clamp around bed rail and truck topper
- Tighten included carriage bolt
Specs:
- Outer dimensions: 3-3/4" long x 1-1/4" wide x 3" tall
- Quantity: 2 clamps
- 90-Day limited warranty
09453 Erickson Manufacturing Truck Capper Clamp - Large - 2 Pack
Video of Erickson Clamps for Truck Bed Toppers - 3-3/4" Long x 1-1/4" Wide x 3" Tall - Qty 2
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of the Erickson Clamps for Truck Bed Toppers
Hello, neighbors. I'm Steve here with etrailer.com. Today we're looking at the Ericsson clamps for the truck bed toppers. You're gonna get quantity, two. They have a 90-day limit warranty and they are nice C-clamps that are gonna help secure a hard Tonneau cover, or a camper shell to the side rails of your pickup truck bed. Now, if you've never used these, they're pretty simple.
You simply loosen the nut here with a socket or a wrench that will pivot that out. It'll roll all the way down, over two inches opening space, actually, and I'll go ahead and pop up some dimensions here real quick. So, again, open, the widest it's gonna go before you can not use the threads anymore is two and an eighth inches wide. And then the measurement side to side on the inside there on the bottom is one and one eighth inches. And the outside to the inside left there on that top blue measurement is one and seven eighth inches wide.
Folks, we have pictures on our website, as well. Anytime you need to take a look at that, just look for that on the website, as well. Now these are a no-drill application. They are nice, durable, (metal clanging) rust-proof aluminum. You can place the clamper on the bed rail and the truck topper or the camper shell, simply tighten the included carriage bolt and you're on your way.
Very simple design, very simple use. Well, that's gonna do it for our look today at these Ericsson clamps for the truck bed toppers. I'm Steven, thanks so much for watching.
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
Ratings & Reviews
4.8
16 reviews
by:
Rick
09/14/2025
They work well for the 2025 Ford F150 with an A.R.E. Classic topper.
by:
96 GMC
03/23/2022
Competing products online had so many bad reviews about quality, that I was nervous about buying them there. The Erickson website gave me the expectation that these were made in the USA (Marine City, MI to be precise). I'm willing to pay for quality, and these cost more than twice as much as the online ones. But I don't know what I got with these. They're holding up fine so far, but I'm nervous as the package says, "Made in China."
by:
DC
09/07/2016
One of my tonneau cover rail clamps broke on my 2004 ram truck. I purchased this pair as a replacement and a spare. They were so well made I swapped out an existing clamp with the new spare from etrailer. I will be making an additional purchase to swap out the remaining older clamps shortly. This product is much better than the OEM clamps.
by:
Jerry Parker
10/04/2017
Checked with the Chevy dealer that installed the Tonneau bed cover for brand I.D. but he couldn't help me. I found the closest looking bracket on etrailer. Figured I could modify as needed. The price was reasonable and much to my surprise they fit. I did have to use different bolts but really that was EZ modification to allow clearance for the soft cover and I had them in my metric bin.
Jerry P.
10/4/2018
The replacement bracket worked so well I nearly have forgotten about it. Perfect replacement for Chevy aftermarket soft folding bed cover as Chevy could not tell me who the bed cover supplier was.
by:
PJae U
05/14/2015
They arrived a day early, the packaging was very appropriate and it was just what I ordered.
Pjae U.
5/26/2016
Still hanging on! Everything stays where put.
by:
William
08/01/2026
by:
Eric
02/22/2024
Very quick delivery, and quality item!
by:
Andy
12/10/2020
Very well made. Worked great.
by:
Carl
11/05/2026
by:
Pat
12/01/2016
Just right stong & Tight
by:
Rocky
11/22/2019
Product came faster than expected that was great.
by:
robert
08/07/2015
just what i needed, fast delivery easy order
by:
Chad
05/23/2018
Works great!
by:
Brian
08/22/2018
Awesome product , Fast delivery
by:
Timothy
02/01/2024
Great service
by:
James F
12/18/2022
16
16
true
See what our Experts say about this Erickson Accessories and Parts
- Opening Dimensions of Erickson Clamps for Truck Bed ToppersI have attached below the dimensions for the Erickson Clamps for Truck Bed Toppers part # EM09453 at max opening.
view full answer...
- Will the Erickson Clamps for Truck Bed # EM09453 Work with the Nissan Utili-Track? Hi David, The Erickson Clamps for Truck Bed Toppers part # EM09453 are not compatible with the Nissan Utili-Track. The track interferes with the lower "jaw" potrion of the C-clamp so it won't properly mount. Usually you need to use specific mounting hardware that comes with the topper or ladder rack to mount it to the track. Are you just needing the clamps or do you need a whole system? If you already have a topper or ladder rack I can try to see if there are adapters for it to fit...
view full answer... - Tall Clamps to Secure Tonneau Cover to Bed on a 2015 Toyota TundraThe Erickson clamps # EM09450 are only 2-1/2 inches tall to being with and even though they could likely open up enough you would probably need longer hardware. That is why I would go with # EM09453. Its a larger set of clamps with longer hardware to start with so you wouldn't have to worry about finding the right thread type and length hardware for the other set.
view full answer... - How Far Will The Erickson Clamps # EM09453 Open? The Erickson Clamps # EM09453 are capable of opening up to 2-1/8".
view full answer... - Availability of Clamps to Hold Aluminum Camper Shell to 2013 Chevy Silverado 1500 The best option we have available for holding an aluminum camper shell onto your 2013 Chevy Silverado 1500 is with the Erickson Clamps # EM09453. These clamps feature a pretty universal design that fit most camper shells and bed rails, but you will want to compare their dimensions and style to your particular shell to make sure they will work. The clamps measure 3-3/4" long, 1-1/4" wide, and 3" tall. They feature a durable aluminum construction and two clamps are included with the kit.
view full answer... - Torklift Tie-Downs For A 2021 Ram 3500The TorkLift Talon Custom Frame-Mounted Camper Tie-Downs - Aluminum - Front # TL94FR and The TorkLift Talon Custom Frame-Mounted Camper Tie-Downs - Aluminum - Rear # TL34FR will work for your 2021 Ram 3500 if you have a 8 foot bed that has a fixed board or step under the cab and has a factory installed hitch. Both tie-downs are rustproof and lightweight aluminum alloy tie-down inserts secure to the durable stainless steel receiver brackets. The high-impact powder coat finish adds an extra...
view full answer... - Can Erickson Clamps for Truck Bed Toppers # EM09453 Secure Tonneau Cover on 2014 Nissan FrontierThe Erickson Clamps for Truck Bed Toppers # EM09453 that you referenced is a general-purpose clamp kit intended for securing a hard tonneau cover or camper shell to the standard bed rails of a pickup. Without knowing the specific tonneau cover brand and model you are using I cannot assure you of their fit in your particular application. Certainly they may work fine, or work with some trimming as you note, but I cannot give you absolute assurance since these items are intended for a broad...
view full answer... - Erickson Clamps Compatibility With Angle Iron Supports On Top Of Bed RailThe Erickson Clamps for Truck Bed Toppers - 3-3/4" Long x 1-1/4" Wide x 3" Tall - Qty 2 # EM09453 you mentioned will secure anything that will fit under the clamps to the bed rail of your truck when the mounting is parallel to your bed rail. If your angle iron has a base that connects them so there is a parallel frame, then 2 clamps on either side should secure your angle iron frame so your Rocket Box will fit onto it. I do not recommend using the clamps to hold just the bars perpendicular...
view full answer... - Could Erickson Clamps for Truck Bed Toppers # EM09453 be Used on 2001 Toyota TacomaThe Erickson Clamps for Truck Bed Toppers # EM09453 that you referenced is a general-purpose clamp kit intended for securing a hard tonneau cover or camper shell to the standard bed rails of a pickup. Most likely it would work fine for you, but you'd have to compare the camper shell you have to the bed rails to determine this. If what you have is a standard install that uses clamps similar to this you'd be fine.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Jameson C
Installed by:
Steven C
Written by:
Chelsea B
Updated by:
Wilson B
Updated by:
Michael B
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
96 G.
3/24/2023
holding up fine so far after a year