Troubleshooting Rear End Sag On a 2022 Chevy Suburban With Weight Distribution Hitch
Published 09/22/2022 >
Question:
I have a 2022 suburban with the max towing package, my trailer is well under the weight the suburban can tow, as well the tongue weight is less than what the max of the suburban specs. I also have a weight distribution hitch Tow capacity = 8100lbs Trailer weight = 4800lbs Tongue weight max 810lbs Trailer tongue weight 700lbs The say is so great that i have had to replace rear tires, and i have only had the suburban 6 months. It even sags when towing my seadoo’s, although not to the extent it does with the travel trailer. I have had it at the dealership several times and they there are no parts to fit it, either airbags or heavy duty shocks. Do you have any recommendations or parts you would recommend? Thank you
asked by: Lori L
Expert Reply:
I do have one recommendation as there is no suspension enhancement for your 2022 Chevrolet Suburban. With the issues you are having it sounds like your Suburban doesn't have the weight distribution set up correctly for your Suburban. I have seen similar issues on vehicles that have air suspension systems. If your Suburban has the Four Corner Air Suspension System there is a particular way you need to set up the weight distribution.
1. Adjust the vehicle air suspension to "Normal Ground Clearance Height."
2. Position the truck so that the trailer is ready to connect (Keep trailer detached).
3. Enable air suspension ‘Service Mode’ in the center infotainment screen under Settings/Vehicle/Suspension.
4. Measure the height of the top of the front wheel opening at the fender to the ground (H1).
5. Attach the vehicle to the trailer, do not attach weight distribution bars at this time.
6. Measure the height of the top of the front wheel opening on the fender to the ground (H2).
7. Install and adjust the tension in the weight distributing bars per the manufacturers’ recommendations so that the height of the front fender is approximately H2- [(H2-H1)/3] (1/3 between the two measured ride heights, below the secondary ride height {H2}).
8. Disable air suspension air suspension "Service Mode."
9. Air suspension will automatically adjust ride height following step 8.
10. Visually inspect the trailer and weight-distributing hitch to ensure that the manufacturers’ recommendations have been met.
If you do not have air suspension the steps are the same but you will disregard steps 3, 8 and 9.
If this still does not fix your issues please let me know what weight distribution hitch you have and the make, model of your travel trailer.
Product Page this Question was Asked From
Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 10,000 lbs GTW, 1,000 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Trunnion Bar
- Fits 3 Inch Frame
- Fits 4 Inch Frame
- Fits 5 Inch Frame
- Fits 6 Inch Frame
- Includes Shank
- 2-5/16 Inch Ball
- Fits 2 Inch Hitch
- Allows Backing Up
- 800 lbs
- 900 lbs
- Equal-i-zer
more information >
Featured Help Information
Instructions
Continue Researching
- Search Results: airlift airbags
- Shop: Towing Mirrors
- Shop: K-Source Snap & Zap Custom Towing Mirrors - Snap On - Driver and Passenger Side
- Shop: Suspension Enhancement
- Q&A: Portable Solar Panel Charge Kit for 2022 Forest River Rockwood Travel Trailer
- Shop: Timbren Rear Suspension Enhancement System
- Shop: Air Lift LoadLifter 5000 Air Helper Springs - Rear Axle
- Shop: Air Lift LoadLifter 5000 Air Helper Springs - Rear Axle
- Search Results: timbren vehicle suspension
- Shop: SumoSprings Solo Custom Helper Springs - Rear Axle
- Shop: Progressive Dynamics 2000 Watt Inverter w/ Transfer Switch
- Shop: Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 10,000 lbs GTW, 1,000 lbs TW
- Shop: Trailer Hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Search Results: trailer hitch
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer tires and wheels
- Video: How to Choose a Trailer Brake Controller
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: 5 Things to Know About Weight Distribution Hitches
- Search Results: trailer wiring
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Article: How to Measure for Trailer Hitch Drop
- Shop: Brake Controller
- Search Results: suspension enhancement
- Q&A: Should I Get Loadlifter 5000 Or 7500 For Towing A 15K Fifth Wheel
- Video: Towing Mirror Options - Custom Fit VS Universal Fit


