Trailer Hitch and Wiring Recommendation for 2009 Chevy Uplander

Question

Question:

je veux acheter un hitch pour un chevrolet uplander LS 2009 et le kit qui vient avec bolts etc. mais je veux aussi une plaque pour recevoir le filage au bumper et =$$ mais je ne comprends pas l`anglais merçi I want to buy a hitch for a 2009 chevrolet uplander LS and the kit that comes with bolts etc. but I also want a plate to receive the bumper wiring and =$$ but I don't understand English thank you

asked by: Guy C

0

Expert Reply:

For your 2009 Chevy Uplander we have the Draw Tite Hitch part # 75278 as a confirmed fit that would work well. It installs easily, is mostly hidden, and has great towing capacities. Then for trailer wiring the Tekonsha kit part # 118396 would be a really great option that installs easily as well.

Pour votre Chevy Uplander 2009, nous avons la pièce d'attelage Draw Tite # 75278 comme un ajustement confirmé qui fonctionnerait bien. Il s'installe facilement, est principalement caché et possède de grandes capacités de remorquage. Ensuite, pour le câblage de la remorque, le kit Tekonsha pièce # 118396 serait une très bonne option qui s'installe également facilement.

expert reply by: Jameson C

0

Answer 1

Congratulations on the addition to the family! I took a look at the online version of the owner's manual for your 2008 Chevy Uplander and it lists a maximum trailer weight of 3,500 pounds. With this in mind your van is more than up to the task of…

view full answer...

Answer 2

I spoke with my contact at Curt and she stated that, technically, Chevy stopped making an Uplander for the US market in 2008 so there is no 2009 model. They did continue to make them for the Canadian market which is why the Tech Tip states the hitch…

view full answer...

Answer 3

If your 2007 Chevrolet Uplander has the 121-inch wheel base then the easiest hitch install will come with the Curt 2-inch Class III hitch #13336 since this option is a no-drill install. This hitch and the 1-1/4-inch Curt #C12336 are the only such…

view full answer...

Answer 4

The Draw-Tite Class III Max Frame Receiver Hitch #75278 referenced in your question is confirmed to fit your 2004 Chevrolet Venture. When installing the hitch on your vehicle, you will need to drill a 1/2 inch hole on the vehicle frame rails. I have…

view full answer...

Answer 5

We can definitely set you up. For a trailer hitch for your 2008 Chevy Uplander we do have a no drill option #13336. This will only fit models with the 121" wheel base. If you do not have the 121" wheel base I recommend the #13344, which…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Trailer Hitch and Wiring Recommendation for 2009 Chevy Uplander

Continue Researching