Can Roadmaster Comfort Ride Shock Absorber RM-2460 Brackets be Welded

Question

Question:

I am looking at the rm2460 for a toyhauler. Can the upper brackets be welded on instead of bolting?

asked by: Chris

0

Expert Reply:

I do know that we have had customers weld the mounting brackets onto their frames when installing the Roadmaster Comfort Ride Shock Absorbers for Tandem Axle Trailers - 5,200-lb to 7,000-lb Axle # RM-2460.

So, the short answer is yes, if your preference is welding the # RM-2460 brackets you most certainly can.

expert reply by: Kyle S

0

Answer 1

I do have an option for you but as the frame has been modified, your only option would be a universal trailer hitch like the Adjustable Width Trailer Hitch Receiver for RVs part #C13702 which can be bolted or welded to the frame. It offers a class…

view full answer...

Answer 2

When deciding what trailer hitch will fit your RV best practice is to measure from inside the frame beam to the inside of the other frame beam to get the frame width. If you have a width of 18-51" then I recommend the Adjustable Width Trailer…

view full answer...

Answer 3

To add a hitch to your 2021 Grand Design Momentum 25G toy hauler you are going to want the Adjustable Width Trailer Hitch Receiver item #C13702. This frame mounted hitch can be bolted or welded on and will fit as long as your frame isn't wider…

view full answer...

Answer 4

The MORryde AllTrek 4000 Equalizers for Tandem Axle Trailers #MR29DR are the new upgrade to their counterpart - the MORryde Premium Rubber Suspension Kit for Tandem Axle Trailers MR47ZR. According to MORryde, the AllTrek has been through more intense…

view full answer...

Answer 5

Hey George, so you would want to have some square brackets welded to your round tube so that the number 10 bracket of the Roadmaster Comfort ride part #RM-2460 can attach properly. If it attaches to a round tube it would not hold up and would…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Can Roadmaster Comfort Ride Shock Absorber RM-2460 Brackets be Welded

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching