Recommended Trailer Hitch for Class B Motorhome with Stretched Frame

Question

Question:

I have checked out the specs on the Curt adjustable hitch but unfortunately that will not work due to the spare tire interference location and the exhaust pipe interference because it runs straight out the rear along the frame rail. I need a hitch that bows out to the rear to clear the spare tire. The Drawtite 37133 looks like it may work if the center to center hole width could be adjuster to 38 1/4”. Is that possible?

asked by: Jim J

0

Expert Reply:

I do have an option for you but as the frame has been modified, your only option would be a universal trailer hitch like the Adjustable Width Trailer Hitch Receiver for RVs part # C13702 which can be bolted or welded to the frame. It offers a class III capacity up to 5,000 lbs. The side brackets are adjustable so you can pick the exact width and then you'll need to drill a few holes into the frame to secure it.

expert reply by: Conner L

0

Recommended Trailer Hitch for Class B Motorhome with Stretched Frame
(click to enlarge)

Jim J.

1/9/2023

I have checked out the specs on the Curt adjustable hitch but unfortunately that will not work due to the spare tire interference location and the exhaust pipe interference because it runs straight out the rear along the frame rail. I need a hitch that bows out to the rear to clear the spare tire. The Drawtite 37133 looks like it may work if the center to center hole width could be adjuster to 38 1/4”. Is that possible?

Conner L.

1/9/2023

I may have another possible option for you in the Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide part # 13703 but you are likely going to need to modify the exhaust hanger or drop it down for installation at the very least. Unfortunately there just isn't a completely bolt-on option so some discretion and or retrofitting is going to be needed to ensure a fit. The width of this hitch is adjustable so you'll be able to adjust that for your frame and the brackets can be reconfigured which will increase your chance of bolting it up without any major modifications.

Answer 1

When deciding what trailer hitch will fit your RV best practice is to measure from inside the frame beam to the inside of the other frame beam to get the frame width. If you have a width of 18-51" then I recommend the Adjustable Width Trailer…

view full answer...

Answer 2

To add a hitch to your 2021 Grand Design Momentum 25G toy hauler you are going to want the Adjustable Width Trailer Hitch Receiver item #C13702. This frame mounted hitch can be bolted or welded on and will fit as long as your frame isn't wider…

view full answer...

Answer 3

The MORryde AllTrek 4000 Equalizers for Tandem Axle Trailers #MR29DR are the new upgrade to their counterpart - the MORryde Premium Rubber Suspension Kit for Tandem Axle Trailers MR47ZR. According to MORryde, the AllTrek has been through more intense…

view full answer...

Answer 4

The Buyers Products 2" Hitch Receiver For GM Express/Savana #3371801100 is designed to fit the standard van chassis with an OEM rear bumper. The top of this hitch will be 2" below the bottom of the frame rails. The Buyers Products 2"…

view full answer...

Answer 5

Buyers Products Class V hitch #3371801102 fits the cutaway cab and chassis version of the 2003 GMC Savana Van. For the cargo and passenger van version their Class V hitch #3371801100 is the correct fit. I am not sure which version of the base vehicle…

view full answer...

Answer 6

Yes, in order to carry a bike rack or cargo carrier on the rear of your 2018 Jay Flight SLX 184BS I highly recommend the Adjustable Width Trailer Hitch Receiver part #C13702 which is specifically designed for trailers and RV's and will give you a…

view full answer...

Answer 7

It's not designed to. The Curt Trailer Hitch item #C15312 is custom fit for 2001 - 2010 Sierra and Silverado 2500 and 3500s. The width of the bolt holes is the same as the item #3371801102 as you can see from the dimensional diagrams below.…

view full answer...

Answer 8

The etrailer Hitch item #e98861 measures 40 wide from center hole to center hole, 11-1/4" from front to back, and the top of the receiver sits 1" below where it mounts to the frame. I have linked a diagram below so you can see the…

view full answer...

Answer 9

The hole centers for the Buyers Products 2" Hitch Receiver #3371801102 are 39-1/4" from drivers side frame rail to passenger side frame rail. This receiver is confirmed to fit the 2014-2021 Chevrolet/GMC Express/Savana Cutaway Chassis. If…

view full answer...

Answer 10

No, you are exactly correct. Lots of people don't check to see if their bumper is rated for the Curt RV Bumper Hitch item #C19101 to be attached to it. This definitely will not work with your 5th wheel trailer. You'll want to go with one of…

view full answer...

Answer 11

I checked with Curt and was able to find a couple of diagrams of the mounting bracket and the receiver portion for the Adjustable Width Trailer Hitch Receiver item #13703. I have attached them below. The width is adjustable between 22" and…

view full answer...

Answer 12

I'd begin by contacting Forest River to ensure that the frame members at the rear of your fifth wheel have sufficient capacity to carry the weight of the carrier and the scooter without damaging anything. If Forest River gives you the go-ahead,…

view full answer...

Recommended Trailer Hitch for Class B Motorhome with Stretched Frame

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching