Anti-Rattle Hitch Pin for Yakima EXO SwingBase Swing Away Hitch Extender

Question

Question:

Is replacement pin Y8890200 compatible with the yakima exo swing base system? Exo swing base replacement pin is #8880953 and threaded section is 5/8-18. Fits 2 inch hitch

asked by: A M

0

Expert Reply:

Yakima has a few different anti-rattle threaded hitch bolt designs and the one you want for your Yakima EXO SwingBase Swing Away Hitch Extender # Y34VR is part # Y52FR on our site. This is the same as the 8880953 you mentioned, it just has our part number instead.

expert reply by: Jon G

0

Answer 1

On the Yakima EXO SwingBase part #Y34VR only the Yakima Exo boxes can fit due to the unique attachment hardware. For that you'd want the part #Y62VR which comes with the box and the base.

view full answer...

Answer 2

Yes, the Replacement Anti-Rattle Hitch Bolt and Washer for Yakima HangOver Bike Rack #Y52FR is the correct replacement hitch bolt for the Yakima Exo System #Y82VR. The #Y52FR is the same as part number 8880953.

view full answer...

Answer 3

Yes, the Holdup for 1-1/4 inch hitches requires a different, smaller hitch pin. For that you'd need the part #Y90195 which comes with the new wrench you'd need and the smaller hitch pin for use with the #8880580.

view full answer...

Answer 4

I checked with Yakima and the correct replacement hitch pin you need for your BackRoad is the part #Y8890176.

view full answer...

Answer 5

To convert your Yakima HoldUp 2 Bike Rack for 2" Hitches #Y02443 so that it will fit a 1-1/4" hitch receiver you need the Replacement Tongue #8880581 along with the Hardware Kit #Y90195. Please note that when using this smaller tongue you…

view full answer...

Answer 6

We do have what you need but I checked with Yakima for you and the part you mentioned will not work with a Yakima FourTimer bike rack. Instead, there are a couple of parts you that you need, and I verified this with Yakima for you: - Replacement…

view full answer...

Answer 7

The Yakima FourTimer bike rack you have does not include locks, so I recommend using the Yakima LockUp Hitch Lock and Cable Lock - Same Key System (SKS) #Y07238. This will secure your bikes and your rack to your trailer hitch and deter theft. For a…

view full answer...

Answer 8

You will need the Replacement Body for Yakima HitchLock #8820048 to fit the Anti-Rattle Hitch Bolt #Y52FR on your Yakima Exo System #Y82VR. You will be able to insert one of your Yakima SKS lock cores into the new hitch lock. If you do not have one…

view full answer...

Answer 9

The Yakima Replacement Hitch Bolt and Clip for Yakima HoldUp Hitch Mounted Bike Carrier, part #Y8890200, is a 5/8 inch bolt and is the same bolt that comes with the part #8890260. The size wrench you would use to install or remove this bolt is 15/16…

view full answer...

Answer 10

I checked with Yakima and for their Fourtimer bike rack part #Y02469 the correct hitch bolt is the part #8890260 and then for the matching lock assembly you'd need the #8820048.

view full answer...

Answer 11

Absolutely! For the Yakima FourTimer Bike Rack for 4 Bikes - 2" Hitches - Frame Mount #Y02469 you will need the Yakima LockUp Hitch Lock and Cable Lock - Same Key System (SKS) #Y07238 which will secure your bikes to the rack, and will work with…

view full answer...

Answer 12

Hey Emiliano, We do have the replacement anti-rattle hitch bolt for the Yakima HangOver Bike Racks #Y02484 and #Y02485 to work in conjunction with the Replacement Hitch Bolt Threaded Insert for Yakima HangOver Bike Carriers #Y77TR. The correct part…

view full answer...

Anti-Rattle Hitch Pin for Yakima EXO SwingBase Swing Away Hitch Extender

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching