Selecting The Correct Load Range 205/65-10 Tires For a Golf Cart

Question

Question:

I currently have the loadstar 205/65/10 B load range tires on my golf cart. Would the c,d or e load range last longer, or ride better?

asked by: Troy L

0

Expert Reply:

The Loadstar K399 205/65-10 Bias Trailer Tire will have the same life span regardless of the weight rating unless they are underrated for your weight. You will want to choose the correct weight rating based on your weight to get the best ride quality. I have listed the maximum weight rating for each tire below. You will want to use the tire closest to your maximum weight rating on your golf cart. If you selected a higher rated tire you will get a stiffer ride since the tires will deflect more of the shock rather than absorbing it due to the stiffness of the tire carcass.

Loadstar K399 Bias Trailer Tire - 205/65-10 Load Range B(910lbs) # AM1HP50
Loadstar K399 Bias Trailer Tire - 205/65-10 Load Range C(1,100lbs) # AM1HP52
Loadstar K399 Bias Trailer Tire - 205/65-10 Load Range D(1,330lbs) # AM1HP54
Loadstar K399 Bias Trailer Tire - 205/65-10 Load Range E(1,650lbs) # AM1HP56

expert reply by: Bud M

0

Answer 1

Hey Nick, the Loadstar K399 Bias Trailer Tire #AM1HP50 that you referenced is the exact same tire as what you have now so it would be exactly what you are looking for. Did yours blow out or develop a leak?

view full answer...

Answer 2

Hey Tony, thanks for reaching out! The Loadstar K399 Bias Trailer Tire - 205/65-10 #AM1HP56 is perfectly fine for use on the highway. Heather wasn't wrong that most people nowadays are using Bias tires for off-road and agricultural trailers, but…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 7

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 8

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 9

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6 inch whereas the 225/75-15 fits widths that are 5 inch to 6-1/2 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 10

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 11

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 12

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Selecting The Correct Load Range 205/65-10 Tires For a Golf Cart

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching