Trailer Hitch Receiver, Wiring and Ball Mounts For a 2022 Lexus RX 350 For Trailer Towing

Question

Question:

I just bought a 2022 Lexus RX 350 without Towing package. I would like to know how to install a tow hitch preferably Curt and Wiring Harness that would fit my vehicle and be trailer ready. Please advise

asked by: Deepak S

0

Expert Reply:

Currently the Draw-Tite Max-Frame Trailer Hitch Receiver # 75540 is the only receiver confirmed to fit your 2022 Lexus RX 350. This receiver is rated for up to 675lbs of tongue weight and 4,500lbs total trailer weight. Be sure to verify your towing capability on your specific Lexus and do not exceed the lower of the 2 ratings.

The T-One Vehicle Wiring Harness # 118255 will provide you with a 4-way flat connector to tow most small trailers. I recommend using the Mounting Brackets # 18140 and # 18144 to secure the connector to the receiver tube.

The etrailer Ball Mount Kit # 989900 will provide you with 2 ball mounts, a 1-7/8" ball, 2" ball, 2 hitch pin and clips and a storage bag to keep everything together. The 2 ball mounts have different drop/rise dimensions so you will be able to use the one that best levels any trailer you need to tow.

expert reply by: Bud M

0

Answer 1

If your Lexus RX350 already has the tow package which provides the taillight converter that's plugged into the connector located behind the passenger side cargo area bulkhead as shown in the linked instructions, you'll just need the #118252…

view full answer...

Answer 2

You are going to need the Draw-Tite Max-Frame Trailer Hitch Receiver #75540 for your 2022 Lexus RX 350 as the Curt Trailer Hitch Receiver #C13143 will only fit the 2010-2015 RX 350. The Draw-Tite receiver may push up slightly on the rear fascia of…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 8

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Trailer Hitch Receiver, Wiring and Ball Mounts For a 2022 Lexus RX 350 For Trailer Towing

Products Featured in This Question

Continue Researching