Installing The Rack-To-Tow Conversion Kit From Stealth - 2020 Volvo XC90

Question

Question:

I already have the Hidden Rack Receiver Item # SH27FR installed on my XC90. Does installation of the Towing Kit with wiring Item # SH36FR require re-removing the bumper cover, etc. for wire routing, etc.?

asked by: Jake

1

Helpful Expert Reply:

When installing The Towing Kit w/ Ball Mount and Trailer Wiring for Stealth Hitches Hidden Rack Receiver # SH36FR you will have to remove the fascia again to route the wire.

I will attach an installation video link below to show how you install the kit.

The ball mount and safety chain loops have a black powder coat finish that offers a superior rust protection.

The maximum gross trailer weight is up to 3,500 pounds but I would recommend checking your vehicle's manual to find the proper towing capacity of your vehicle.

expert reply by: Noah E

1

Answer 1

Hello Brian, thanks for reaching out. We do have a product that will help with this. Take a look at the following: - Ball Mount for Stealth Hitches Hidden Receiver Hitch #391BMU7S This provides more rise than the standard ball mount that came with…

view full answer...

Answer 2

There are two options available if you would like to add a Stealth Hitches Hidden Rack Receiver to your 2021 Volvo XC60. If you do not plan on towing you need the #SH87FR. If you will be towing, you will need the #SH87FRT which comes with the towing…

view full answer...

Answer 3

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 4

Yes, it does Alan so long as you have a light bar connected to it. The Curt T-Connector item #C84RJ itself won't stop the reverse collision sensor from going off when you're using a bike rack on your 2023 Volvo XC60. You need to have…

view full answer...

Answer 5

Reprogramming will be necessary with the installation of the Towing Kit w/ Ball Mount and Trailer Wiring #SH36FR. Unlike other wiring harnesses, this includes a wiring control module that you will plug your vehicle wiring harness into. Without taking…

view full answer...

Answer 6

I have a solution for you, we have the EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - Class III - 2" #EH95VR which my contact at Ecohitch was able to confirm will fit your 2019 Volvo XC60 T8 Plug In Hybrid. As another secure way to…

view full answer...

Answer 7

Hello Geoff, thanks for reaching out. We do offer a stealth hitch and wiring package for the 2024 Volvo XC90. For that, I recommend the following: - Stealth Hitches Hidden Trailer Hitch Receiver w/ Towing Kit - Custom Fit - 2" #SH27FRT This…

view full answer...

Answer 8

The #SH67FR Stealth Hitches Hidden Rack Receiver installs behind your 2021 Volvo V90 bumper beam. As long as Volvo removes the current hitch, including any additional welded on parts, you will be able to install the Stealth Hitch without any issues.…

view full answer...

Answer 9

Unfortunately, Stealth doesn't sell the wiring harness separately from the ball mount portion for the #SH67FR hitch. What you can do is purchase the hitch along with the ball mount and the wiring which provides a cost savings. The hitch, ball…

view full answer...

Installing The Rack-To-Tow Conversion Kit From Stealth - 2020 Volvo XC90

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching