Recommended Trailer Brake Controller For a 2022 Jeep Wrangler 4xe With Factory Tow Package

Question

Question:

Would you still recommend the Redarc tow pro elite for the hybrid rubicon

asked by: Christopher W

0

Expert Reply:

Yes, you can use the Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR with the Plug-and-Play Wiring Harness # RED93RR on your 2022 Jeep Wrangler Rubicon 4xe with the factory tow package. This controller includes a Universal Mount # 331-TPSI-001 that will give you a factory appearance and it does not take up a lot of room like other controllers that mount on the lower dash.

The Tow-Pro Elite allows you to switch to a user controlled mode that will allow you better control if you plan on overlanding with your trailer. It will also come in handy if you are using the regenerative braking feature as you can adjust the power to the trailer brakes more easily.

expert reply by: Bud M

0

Answer 1

For your 2021 Jeep Wrangler 4xe I recommend the Tekonsha Prodigy P3 Trailer Brake Controller #90195. This brake controller will give you proportional braking which automatically adjust braking force to your Flagstaff based on how hard or light the…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 7

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 8

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 9

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 10

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Answer 11

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 12

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Recommended Trailer Brake Controller For a 2022 Jeep Wrangler 4xe With Factory Tow Package

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching