Do Different Timbren Axle-Less Suspension Systems Have the Same Camber and Ride Height
Updated 07/11/2022 | Published 07/07/2022
Products Featured in This Question
Question:
If you wanted to mix a Timbern 4inch 2000 lb without brakes and a Timbern 4inch 3500 lb with brakes is it an exact match as far as attaching to the trailer frame and it being aligned with caster and camber as well as ride height?
asked by: Sean C
Expert Reply:
The caster and camber could be the same on the # TASR35HDS03 and # ASR2KHDS05. The system has a slight manufacture camber. However, it is up to you on how much camber you have based on the installation. This can be changed using the included shims.
As far as the ride height is concerned, these do not have the same dimensions. This will result in a different height between the systems when installed. The # TASR35HDS03 will also stick out farther.
Since there is no real advantage to using two different systems I would recommend choosing two of the same capacity. If you choose to use the # ASR2KHDS05 you could use # AKHD-545-35-EZ-K for the hub and drum assembly, # AKEBRK-35-SA for brakes, and # AKIHUB-545-35-K for an idler hub on the pair without brakes.
The # TASR35HDS03 uses 6,000 lb hub and drum assemblies so you would need different parts. I recommend the # AKHD-655-6-EZ-K, # AKEBRK-6, and # AKIHUB-655-6-EZ-K for this setup.
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Heavy Duty - 4" Drop - 4 Bolt Flange - 2,000 lbs
- Trailer Axles
- Rubber Spring Suspension
- Standard Grade
- No Hubs
- 2000 lbs
- Spindles Only
- Universal Fit
- Drop - 4 Inch
- Timbren
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Timbren Axle-Less Trailer Suspension w Electric Brakes - Standard - 4" Drop - 5 on 4-1/2 - 3.5K
- Shop: Timbren Axle-Less Trailer Suspension - Heavy Duty - 4" Drop - 5 Bolt Flange - 3,500 lbs
- Article: Trailer Wiring Diagrams
- Shop: Stabilizer Jacks - 6-1/4" Drop Leg Travel - 18" - 650 lbs - Qty 2
- Video: Single Axle Trailer Fender w/ Backing Plate Spec Review
- Video: Breaking Down the Single Axle Trailer Fender w/ Backing Plate
- Shop: Demco A-Frame Trailer Coupler w/ Jack Hole - eZ-Latch - Silver - 2" Ball - Bolt On - 10K
- Search Results: timbren
- Shop: Single Axle Trailer Fender w/ Backing Plate - Steel - 14" to 15" Wheels - Qty 1
- Shop: Timbren Axle-Less Trailer Suspension - Heavy Duty - 4" Lift - 4 Bolt Flange - 2,200 lbs
- Shop: Optronics LED Trailer Light - Brake, Tail, Turn - Submersible - Oval - Red
- Q&A: Are Computer Aided Design (CAD) Files Available for Timbren Trailer Axle-less Kit A20RS545
- Q&A: Can I Use the Spare Tire From my Tow Vehicle as a Spare on my Trailer
- Q&A: What Is The Angle For The etrailer A-Frame Trailer Coupler?
- Shop: Brake Controller
- Article: Trailer Lighting Requirements
- Q&A: Comparing Curt Echo And Tekonsha Prodigy RF Wireless Brake Controllers
- Q&A: What is the Height and Width of a 205/75-15 Tire on a 15 Inch Trailer Wheel
- Q&A: Largest Recommended Wheel and Tire For Use With Timbren Axle-Less Trailer Suspension # A20RS545
- Video: In-Depth Review of the Ark Xtreme Off-Road Swivel Trailer Jack w/ 2 Wheels
- Video: Comprehensive Review: Stabilizer Jacks
- Q&A: How to Determine Proper Spacing Between Tire and Fender for Clearance on 3000 LB Trailer
- Search Results: swing jack
- Search Results: hubs 5 on 51 2
- Search Results: jack with wheel
- Search Results: timbren axle
- Search Results: stabilizing jack
- Search Results: tongue jack
- Video: All About the LED Trailer Mini Clearance and Side Marker Light with Grommet
- Video: Ultimate Overview of the Front Runner Propane Tank Holder