Replacement Pins For Blue Ox TrackPro Weight Distribution Hitch

Question

Question:

I bought a blue ox weight distribution hitch a few months back and used it on a trip from the gulf coast to South Dakota. Install was on point. Weight distributes great, anti sway is amazing. The issue I ran into was the metal pins with the cotter keys keeping the flat part of the spring bars on the mount. 1/2 way thru trip on one side the angle pin bent and was jammed. It finally worked its self out somewhere in Missouri. Inter States are a bit rough. I need one new pin plus a spare for the future. Tell me how to acquire please!

asked by: Mark R

0

Expert Reply:

We do indeed have replacement pins for your Blue Ox TrackPro weight distribution hitch. I believe you are referring to the L-Pins on the brackets, but in case you were referring to the pins with latches that hold your spring bars in the head, I'll link those as well:

- Replacement Spring Bar Retaining L-Pins for Blue Ox TrackPro and 2-Point Weight Distribution # BLU98XR

- Replacement Spring Bar Attachment Pins for Blue Ox TrackPro # BLU72FR

Both pins come in a quantity of two so you'll have a new one plus a spare like you were wanting.

expert reply by: Kyle S

0

Answer 1

The spring bars may or may not play a part. Given the trailer is from 2020, there is a good chance you have spring bars that work with the old or new head. The old head is the Replacement Head for Blue Ox SwayPro Weight Distribution Systems #BXW4011…

view full answer...

Answer 2

I reached out to Blue Ox and found that the correct replacement pin for your hitch is the Replacement Spring Bar Retaining L-Pins for Blue Ox TrackPro and 2-Point Weight Distribution - Qty 2 #BLU98XR.

view full answer...

Answer 3

You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Answer 4

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 5

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Answer 6

Hello Bruce, Thanks for writing in! Using butyl tape between the trailer body and the Single Axle Jeep Style Trailer Fender - Diamond Plate Aluminum - 13" to 15" #HP96VR is exactly the route I would go. It stays flexible, creates an…

view full answer...

Answer 7

Hey Blane! No, you don't necessarily need to replace your existing breakaway system when switching from electric drum brakes to electric-over-hydraulic disc brakes. You can reuse it as long as the battery meets the minimum capacity required by…

view full answer...

Replacement Pins For Blue Ox TrackPro Weight Distribution Hitch

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching