Replacement L-Pins for Blue Ox Weight Distribution Hitch

Question

Question:

on the blue ox L pins I need and extra set the number on my hitch head is AT 20-10E you show 2 different sets on info page which one will work TY

asked by: James L

0

Expert Reply:

I reached out to Blue Ox and found that the correct replacement pin for your hitch is the Replacement Spring Bar Retaining L-Pins for Blue Ox TrackPro and 2-Point Weight Distribution - Qty 2 # BLU98XR.

expert reply by: Robin H

0

Answer 1

We do indeed have replacement pins for your Blue Ox TrackPro weight distribution hitch. I believe you are referring to the L-Pins on the brackets, but in case you were referring to the pins with latches that hold your spring bars in the head,…

view full answer...

Answer 2

I went out to our warehouse and measured the Replacement L-Pin for Equal-i-zer 4,000-lb Weight Distribution Systems #90-03-9460. The length of the long side is 2-1/2" long, the short side measured at 1-1/2" long and the thickness of the pin…

view full answer...

Answer 3

Hey Terry, congrats on your new trailer! Your Fastway e2 Weight Distribution System item #FA94-00-0600 is going to top out at 600 lbs of tongue weight so you'll definitely want to upgrade those round bars. You won't need to purchase an all…

view full answer...

Answer 4

Thanks for the picture! I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.

view full answer...

Answer 5

Hey Matt, thanks for reaching out! I spoke with my contact at Lippert and that particular piece of the arm isn't available as a replacement part, so we'll need to get you setup with a whole new arm assembly. The correct replacement for your…

view full answer...

Answer 6

Hey Ron & Leslie, The Replacement Spring Bar Retention Bracket Kit #RP58498 you were looking at is a compatible replacement for your Reese Pro Round Bar Weight Distribution #RE34FR or you could also use part #RP25FR.

view full answer...

Answer 7

The correct replacement circuit and control board for your Lippert Electronic leveling system is the Replacement Control Panel for Lippert Ground Control 3.0 and Travel Trailer RV Leveling System #LC421484. This will be a plug and play solution, so…

view full answer...

Answer 8

That is not normal wear for the L-Brackets on your Blue 2-Point #BLU75FR to be that worn. It looks like you have too much angle in the head, so I recommend trying to tilt the L-brackets a little to try and get the bar less on just that one edge, and…

view full answer...

Answer 9

Your situation is a great option for the Blue Ox SwayPro Weight Distribution #BLU54TR. This particular kit is rated for trailers up to 15,000lbs with a tongue weight of 1,000-1,500lbs. When you need to haul your travel trailer you can use some…

view full answer...

Answer 10

The Timbren Suspension Enhancement item #T28MR and the RoadActive Suspension item #RAS54FR can both be used in tandem on your 2021 Silverado 1500 but I wouldn't recommend it. The Timbrens are great to reduce sag but they only engage when your…

view full answer...

Answer 11

The SumoSprings Solo Custom Helper Springs #SS45FR will be noticeable at times when driving your 2022 GMC Sierra 1500 Limited unloaded. The springs will have an air gap between them and your axle when you have no additional weight on the rear…

view full answer...

Answer 12

If you are looking for the best option to get rid of sag on your 2022 Chevy Silverado 1500, you will want the Firestone Ride-Rite Air Helper Springs #F2609. These offer up to 5,000 pounds of load leveling capacity at 100 psi, but can then be deflated…

view full answer...

Replacement L-Pins for Blue Ox Weight Distribution Hitch

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching