Parts Needed to Install 7-Way and 4-Way Trailer Wiring in 2022 Hyundai Palisade

Updated 06/06/2022 | Published 06/04/2022

Question:

I see the Curt 56466 custom wiring harness that will connect to my 2022 Palisades standard wiring connector, but it only comes in 7-blade RV or alternatively a 4-pin flat model under an alternative Curt part #. Is there any way to have a multi-tow connector possibly connected to this wiring harness for built in support of both connector types? I know I could get a plug-in adapter when I need 4-pin flat but would rather have both options always available without adapters if possible. I have also seen multi-tow connectors that plug into factory installed 4-pin flat connectors, but need the other wires manually spliced in. I was hoping that the connector on the end of the Curt 56466 could just have another socket plugged into it that supported both connector options... Would the Hopkins OEM replacement multi-tow connectors be compatible with the Curt connector?

asked by: Tim

Helpful Expert Reply:

What you can do to have a 7-way/4-way combo at the rear of your 2022 Hyundai Palisade is to start with the 7-way kit part # C68JR that you referenced and then instead use the 7-way/4-way socket part # 30955 in place of the included 7-way and you'd have what you are looking for as well as a spare 7-way.

expert reply by: Jameson C