How to Pick Out Replacement Dust Cap for Trailer Hub

Published 06/06/2022

Products Featured in This Question

Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2

(2312)

$15.59

2-1/2" Lubed Dust Cap and Rubber Plug - 2.45" x 1.52" x 1.18" - Qty 1

(672)

$17.25

4" Carbon Fiber Digital Caliper

(27)

$12.20

Phoenix USA QuickTrim Hub Cover for Trailer Wheels - 6 on 5-1/2 - ABS Plastic - Chrome - Qty 1

(1791)

$26.04

Grease Cap, 2.72" OD Drive In with Plug - Qty 2

(175)

$25.63

Question:

I'm actually looking for the cover that goes over that part and the lugnuts. See attached photo.

asked by: David

Expert Reply:

We definitely can help but we need to know the diameter of the cap so that we can pick out the correct one. You'll need to remove the one you have and measure the outside diameter of the cap where it fits into the hub and we'll be able to pick you out what you need.

If you have a 1.99 inch diameter you'd want the part # RG04-040, if you have a 2.45 inch diameter you'd need part # DC250L-DCRP, or if you have 2.72 inch you'd want part # RG04-120.

To measure your hub bore you'd need the part # PTW80157.

expert reply by: Jameson C

6 Lug Wheel Cover
(click to enlarge)

David

6/6/2022

I'm actually looking for the cover that goes over that part and the lugnuts. See attached photo.

Jameson C.

6/6/2022

Thank you for getting me that picture. Based on that what you are looking for is a hub cover like the part # QT655C. this matches the wheel bolt pattern you have now and is chrome which will look nicer as well.