Lippert Spindle Nut Kit w/ Round Washer - For 12,000-lb to 16,000-lb Axles

Video Transcript for Review of Lippert Spindle Nut Kit - LC64RP

Hi, everyone, Steven here with etrailer. Let's take a look at our Lippert Spindle Nut Kit with round washer for 12 to 16,000 pound axles. So folks, as you know, your spindle nut will lock the wheel bearings and the hub in place, and that's gonna help prevent unwanted movement and give you that smooth support during that tire and wheel rotation over your spindle. Now, again, this is built for heavy-duty axles. As you can see, in comparison to my hand, it's pretty thick, very beefy, nice castle nut, large washer. Again, 12 to 16K rated trailer axles.

Make sure you're matching up the thread before you make a purchase. This is a 1 3/4 inch wide by 12 thread size. So make sure you confirm that that spindle nut here will fit your actual setup. And of course, you have the cotter pin here to go through there and keep everything nice and secure once you get everything in place on the spindle. Now, this is a one, two, three, four, five, six-slot castle spindle nut.

Very simple design there, very common. And again, you got the cotter pin to go through there once you get everything in place. Folks, you're gonna get a quantity of one, so this is one complete kit for one side of an axle. I'm Steven with etrailer. Thanks for watching, and stay safe while you're towing.

.