Replacement Lock Pin Assembly for Demco Hijacker UMS Fifth-Wheel Side Rail Assembly

Question

Question:

I have a Demco underbed 5th wheel hitch FW24AS that I need a replacement locking pin for right side will this pin CODE DM27VR fit

asked by: Larry J

0

Expert Reply:

The # DM27VR is the replacement for the left side. Since you are looking for the right side pin you need the Replacement Right-Side Lock Pin Assembly for Demco Hijacker UMS Fifth-Wheel Side Rail Assembly # DM87VR instead.

expert reply by: Robin H

0

Answer 1

Thank you for purchasing the Demco Hijacker Autoslide 5th Wheel Trailer Hitch #DM8550034 back in 2017. All replacement parts we sell appear on the page I linked for you. I also linked the install instructions for this hitch and on pages 9 through 11…

view full answer...

Answer 2

It sounds to me like the gears of the slider inside of your Replacement Head and Base Assembly for Demco Hijacker Autoslide 5th Wheel Trailer Hitches #DM6077 may either have debris blocking them, the teeth may be chewed up and need to be replaced, or…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Answer 12

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Replacement Lock Pin Assembly for Demco Hijacker UMS Fifth-Wheel Side Rail Assembly

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching