Brake Control Plug Location in a 2022 Nissan Frontier

Question

Question:

Where is the factory port plug for brake controller located on 2022 Nissan Frontier?

asked by: Larry

0

Expert Reply:

From what I can find on the 2022 Nissan Frontier, the plug for the brake controller that will let you use a harness like the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers # 3050-P is located just above the OBD connector, taped tight to a harness.

The Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers # 3050-P will allow you to have a plug-n-play installation of a brake controller like the Tekonsha Prodigy P3 Trailer Brake Controller # 90195.

expert reply by: Scott S

0

Answer 1

From what I could find, it looks like the plug for a trailer brake controller on your 2023 Nissan Frontier is located in the same location as the 2022 model year. That is behind the side panel by the OBD connector and is likely pushed back into the…

view full answer...

Answer 2

The biggest difference between the two Redarc brake controllers is that the Tow-Pro Elite #RED44FR has a proportional control and user controlled mode you can switch between, while the Tow-Pro Liberty #RED24FR has just the proportional mode. The…

view full answer...

Answer 3

Whether a load range C or the greater capacity load range D, your will need to keep your tires inflated to their maximum psi rating for best performance and longest life. For a ST175/80D13 with load range D like the Loadstar Item #AM1ST77, the…

view full answer...

Answer 4

The 5 on 4-1/2 bolt pattern of a hub or wheel such as #AM20365 means that there are 5 lugs and, if you drew a circle that passed through the center of each lug the diameter would be 4-1/2 inches. I have included some links and a picture that will…

view full answer...

Answer 5

Wheel bolt patterns are defined by two numbers: the first being the number of lug nuts and the second being the diameter of the circle the lug nuts are arranged in. So a 5 on 4-1/2 bolt pattern is 5 lugs arranged in a circle that is 4-1/2 inches in…

view full answer...

Answer 6

If you have a tandem axle travel trailer that weighs 6,000 lbs a Load Range C tire like the part #AM1ST92 would work, but since you said that is the weight when empty you would most likely want to go with the Load Range D just to be safe. For that…

view full answer...

Answer 7

When it comes to The Curt Echo Brake Controller #C51180 if the Bluetooth gets disconnected or if you lose service, or if your phone battery dies, the last setting you had for the controller would be retained, but you will lose the ability to use the…

view full answer...

Answer 8

One inch of preload is too much for the install of the SumoSprings kit part #TSS-107-40 that you referenced. You want between 1/4 and 1/2 inch of preload otherwise you'll have a harsher ride quality. If you have spacers installed you would need…

view full answer...

Answer 9

I contacted the manufacturer and they told me that adding the Replacement Wiring Harness, Item #118267, should get your 7-way connector ready to go. You also must have a brake controller in order to control the electric brakes on your trailer. I…

view full answer...

Answer 10

That you have the Curt Wiring Harness with 4-Pole Flat Trailer Connector, #C56225, is the first needed step. If you have not already installed this, please note the linked installation video below for assistance. The next item needed is the Universal…

view full answer...

Answer 11

If you want to use the Redarc Tow-Pro Elite Trailer Brake Controller - 2 Braking Modes - 1 to 3 Axles - Proportional #RED44FR, you will need the Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers #RED39FR

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Brake Control Plug Location in a 2022 Nissan Frontier

Featured Help Information

Miscellaneous Media

Continue Researching