Why Did My Bearings Burn Up
Published 05/12/2022
Products Featured in This Question
Question:
I recently changed all 4 8k brake assemblies on a trailer. I didnt over tighten the spindle nut I put new ones along with new bearings and seals. When I took the drums off, they were a little rough on the inside, but the customer didnt want to change them. Out of all 4 one of them burned up and flew off with Rim and Tire leaving only the remains of the bearings and spindle nut. What could have caused it? To mention also, they were running with oil not grease. Does that make a difference?
asked by: Juan R
Expert Reply:
When a bearing wears out or burns up it could be because of inadequate lubrication, faulty installation or improper adjustment. For the repair to be successful, you must first determine why the previous bearing failures occurred.
You will need a new hub and drum depending on what your inner and outer bearing number is. Easy Grease Trailer Hub and Drum Assembly # AKHD-545-35-EZ-K has a bolt pattern of 5 on 4-1/2 inches and has an inner bearing # L68149 and outer bearing # L44649.
I attached a review video link below.
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- EZ Lube
- Pre-Greased
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: free shipping
- Search Results: light kit
- Search Results: tow lights
- Search Results: coupler lock
- Search Results: e track
- Shop: Vehicle Tow Bar Wiring
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Search Results: b&w adjustable hitch
- Shop: B&W Tow & Stow 2-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 7.5K - Black
- Video: B and W Tow and Stow 2-Ball Mount Feature Review
- Shop: Mud Flaps
- Shop: Loadstar ST205/75D15 Bias Trailer Tire - Load Range C
- Shop: Loadstar ST205/75D15 Trailer Tire with Silver Mod Wheel - 5 on 5
- Shop: Curt Custom Tail Light Wiring Kit for Towed Vehicles
- Shop: Loadstar ST205/75D15 Trailer Tire with White Spoke Wheel - 5 on 4-1/2
- Q&A: How Tight Should the Spindle Nut be on a Dexter 8,000 Pound Axle
- Q&A: Is Additional Grease Needed to be Pumped into Dexter Trailer Hub that is Pre-Greased
- Q&A: Should Trailer Bearings Spin on the Spindle they are Installed On
- Search Results: nut retainer
- Shop: Trailer Hitch
- Shop: Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Bearing Kit for 1-1/16" BTR Spindle
- Q&A: What Size Socket Works with 1 Inch Spindle Castle Nut # 165686?
- Q&A: Installing a Wireless LED Light Bar for Towed Vehicle Lighting
- Video: Dexter Trailer Idler Hub Assembly for 2,000-lb E-Z Lube Axles Feature Review
- Q&A: Parts Needed To Tow Nucamp Tab 360 Camper With 2022 Ford Ranger
- Q&A: Is The Curt Adjustable 2-Ball Mount Able To Come With A 1 7/8 Ball?
- Shop: Trailer Wiring
- Video: Install: Curt Trailer Hitch Receiver on a 2022 Cadillac XT6
- Shop: Brake Controller