SumoSprings For a 2020 Mercedes Sprinter 3500XD Dually Van

Question

Question:

I have a 2020 Mercedes 3500XD. I know Sumos will fit on a 3500, but will they work on the XD duelly? If so, what is the correct product for the rear? Thank you

asked by: Tim O

1

Helpful Expert Reply:

I reached out to SuperSprings and they confirmed that the SumoSprings Solo Custom Helper Springs # SSR-338-54 are the correct fit for your 2020 Mercedes-Benz Sprinter 3500XD.

expert reply by: Bud M

1

Answer 1

For your 2021 Dynamax Isata 3 24FWM motorhome built on the 2019 Mercedes-Benz Sprinter 3500 chassis I recommend the SumoSprings Solo Custom Helper Springs - Rear Axle #SSR-338-54 which have a 1400lb load capacity which will do great at supporting the…

view full answer...

Answer 2

The correct weight capacity SumoSprings system for your 2020 Jayco Melbourne will depend on how much support you are looking for. If you are not getting a lot of body roll and just need a little support, go for the 900 pound #SSR-338-47. On the other…

view full answer...

Answer 3

In order to minimize sway on your 2020 Wayfarer Class C, I recommend starting with the Roadmaster #RM-1209-131 since sway begins at the rear of the coach. Adding a rear sway bar is, in most cases, the quickest and most common way to combat sway that…

view full answer...

Answer 4

The SumoSprings Maxim Custom Helper Springs like part #SSR-336-47-1 do indeed offer a better ride quality when compared to the SumoSprings Solo Custom Helper Springs like part #SSR-338-47 which is what I assume you are referring to. However, the…

view full answer...

Answer 5

For your 2020 PleasureWay Plateau TS RV the SumoSprings kit part #SSR-338-47 for the rear and the #SSF-106-40 are going to give you just the right amount of support to improve handling and bottoming out resistance without affecting ride quality so it…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 10

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 11

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 12

Hi JD; the Furrion Chill Cube #FR49TD air distribution box has a vent on it you can open and close. See the picture attached below. When it is closed it forces more of the air through the ducted system. Assuming you have a ducted system you will need…

view full answer...

SumoSprings For a 2020 Mercedes Sprinter 3500XD Dually Van

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching