Replacement Bottom Cradle for Thule Hullavator Pro Kayak Carrier
Updated 04/28/2022 | Published 04/27/2022
Products Featured in This Question
Question:
Hi Scott, Thanks for telling me how to determine which model my Hullivator is. I now realize I have a little of both models. My Hullivator is the older model. About 2 years ago I damaged one of the arms entering a covered garage. The person who helped me fix it, split the arm from the newer model to replace the damaged one. The forward arm has a black cradle on top and a silver one on the bottom. That arm holds the bow of my kayak very well. However the rear arm with a silver cradle on top and a black cradle on the bottom does not hold it well. The silver cradle hugs it well but the bottom black one not so much. Any suggestions?
asked by: Katherine
Expert Reply:
The Replacement Cradle Assembly for Thule Hullavator Pro Kayak Carrier # 7521772001 is the correct replacement bottom cradle for a Thule Hullavator Pro.
The Thule Hullavator Pro Kayak Carrier # TH898 has been out for more than 6 years and is more than likely the Hullavator that you have. There was a previous Hullavator XT but it was discontinued and replaced by the Pro. There is an easy way for you to tell if you have the Pro or XT. The bars on the Replacement Cradle Assembly for Thule Hullavator Pro Kayak Carrier # 7521772001 are black for the Pro and they are silver if you have the XT.
Continue Researching
- Search Results: thule hullavator parts
- Shop: 24x60 etrailer Cargo Carrier for 2" Hitches - Steel - Tilting - Folding - 500 lbs
- Shop: Replacement Square Nut for DeWalt Contractor Series Ladder Racks or Thule Roof Mounted Bike Carriers
- Shop: Replacement Pivot Pin for Thule Hullavator and Hullavator Pro
- Q&A: Replacement Cradles For Thule Hullavator Pro Kayak Carrier
- Q&A: Thule Hullavator Model 897XT Top Cradle Assembly Replacement Part Number
- Q&A: Replacement Cradles For Thule Hullavator TH898
- Shop: Replacement M6CS M6 x 35 mm Screw for Thule Hullavator Pro Kayak Carrier - Qty 1
- Shop: Replacement M6 x 37 mm Screw for Thule Hullavator Pro Kayak Carrier - Qty 4
- Video: Review of Thule Replacement Screw M6CS M6 x 35 mm Hullavator Pro - TH63NM
- Video: Replacing the Thule Hullavators M6 Screw
- Video: Hands-On with the Replacement M6 x 37 mm Screw for Thule Hullavator Pro Kayak Carrier
- Shop: Thule Hullavator Pro Kayak Roof Rack and Lift Assist w/ Tie-Downs - Saddle Style - Universal Mount
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Search Results: trailer hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer tires and wheels
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Search Results: trailer wiring
- Shop: Suspension Enhancement
- Video: A Look at the Power Mountain Tallboy 6 Ton Off-Road Bottle Jack with a Military Cargo Trailer
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Search Results: trailer jack
on Accessories and Parts
Katherine
4/27/2022
Hi Scott, Thanks for telling me how to determine which model my Hullivator is. I now realize I have a little of both models. My Hullivator is the older model. About 2 years ago I damaged one of the arms entering a covered garage. The person who helped me fix it, split the arm from the newer model to replace the damaged one. The forward arm has a black cradle on top and a silver one on the bottom. That arm holds the bow of my kayak very well. However the rear arm with a silver cradle on top and a black cradle on the bottom does not hold it well. The silver cradle hugs it well but the bottom black one not so much. Any suggestions?