Thule Hullavator Model 897XT Top Cradle Assembly Replacement Part Number

Question

Question:

Trying to locate other items I need to reattach the Top Cradle Assembly: Slide plate Wing Nut

asked by: Reginald R

1

Helpful Expert Reply:

I checked with Thule just now and the correct part number for a replacement top cradle assembly for your Thule Hullavator 897XT is the part # 7521771001 that you referenced so this would be exactly what you'd need.

I also searched for the part number you mentioned and couldn't find anything.

expert reply by: Jameson C

1

Reginald R.

2/14/2020

Trying to locate other items I need to reattach the Top Cradle Assembly: Slide plate Wing Nut

Jameson C.

2/14/2020

For that part number you'd need the # 753-0783-08.

Answer 1

Thank you so much for the photo and it sounds like you are just needing the cradles for the Thule Hullavator Pro Kayak Carrier #TH898, which we do have for you. There are "top" and "bottom" cradles for both sides of the…

view full answer...

Answer 2

If you need the smaller top cradle then you can go with Replacement Cradle Assembly for Thule Kayak Carrier - Top #7521771001. If you happen to also need the larger bottom cradle then the correct part is Replacement Cradle Assembly for Thule…

view full answer...

Answer 3

The Replacement Cradle Assembly for Thule Hullavator Pro Kayak Carrier #7521772001 is the correct replacement bottom cradle for a Thule Hullavator Pro. The Thule Hullavator Pro Kayak Carrier #TH898 has been out for more than 6 years and is more than…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 12

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Thule Hullavator Model 897XT Top Cradle Assembly Replacement Part Number

Products Featured in This Question

Continue Researching