Trailer Hitch Receiver and 4-Way Wiring Harness For a 2022 Kia Sorento X-Line AWD

Question

Question:

Which hitch fits a 2022 Kia Sorento X-Line AWD? Am I able to retain the spare tire in the same location? Also do you have the wiring harness for it.

asked by: H M

1

Helpful Expert Reply:

I recommend the etrailer Trailer Hitch Receiver # e28AR for your 2022 Kia Sorento X-Line AWD. This receiver is confirmed to fit all trim levels of your 2022 Kia Sorento. The spare tire can be retained in its original location with this receiver. The receiver has a matte black finish that will blend well with the matte black rear fascia that you have on your Sorento.

You will need to remove the rear drivers side underbody panel to confirm if you have the connectors for the factory towing package. If these connectors(see image) are present you can use the Wiring Harness for Factory Tow Package # CU94FR. Otherwise you will need to use the T-One Vehicle Wiring Harness # TK26FR that ties into the tail lights. You will be able to use the Mounting Brackets # 18144 and # 18140 to secure either 4-way to the cross tube on the receiver without drilling.

expert reply by: Bud M

1

Factory Tow Package Connectors On a 2020 Kia Sorento
(click to enlarge)

Answer 1

The best hitch for your 2023 Hyundai Santa Cruz is going to be the Curt Trailer Hitch item #C23WR. This hitch is custom fit and bolts to your Santa Cruz with included hardware. The Curt Trailer Hitch item #C23WR is a class III hitch, with a 2"…

view full answer...

Answer 2

Hi Jerry, For your 2025 Kia Sorento PHEV you would need the Curt Trailer Hitch Receiver #C37RV for the trailer hitch. The right light kit for your Sorento is going to depend on a few factors. For models with the tow package, like you stated you have,…

view full answer...

Answer 3

Hello Jim, thanks for reaching out. According to Kia, the tow package connections on a 2024 Sorento will be under the driver's side rear bumper cover. We have not been notified of any changes for the 2025 models, but it is too soon to say for…

view full answer...

Answer 4

I'd recommend going with the etrailer brand #e28AR Class III hitch. When installed on your 2022 Santa Fe, the hitch crossbar will be concealed behind the vehicle bumper, with only the receiver tube and safety chain loops being visible. I'll…

view full answer...

Answer 5

Yes, it does! The Curt Hitch item #C13420 does fit the 2024 Kia Telluride. This hitch is custom fit and bolts to your Kia with included hardware. It is a class III hitch with a 2" receiver that has a 5,000 lbs towing capacity and a 750 lbs…

view full answer...

Answer 6

Yes, it will! The Draw-Tite Hitch item #DT34GR has been confirmed to fit the 2024 Kia Carnival. This hitch is custom fit and bolts to your van with included hardware. It is a class III hitch with a 2" receiver it has a 4,000 lbs towing capacity…

view full answer...

Answer 7

Congrats on the new SUV. To add a hitch to your 2023 Kia Telluride, I recommend the Curt Trailer Hitch item #C13420. This hitch is custom fit and bolts to your Kia with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 8

To add a hitch to your 2023 Hyundai Santa Cruz, I recommend the Curt Trailer Hitch item #C23WR. This hitch is custom fit and bolts to your Hyundai with included hardware. I really like this hitch because the main crosstube mounts behind your rear…

view full answer...

Answer 9

Yes, we have the wiring harness and you can order it in addition to the item #C26VV hitch for your 2024 Toyota Grand Highlander. Whether you have the plug and play connectors will depend on if your Highlander has the towing package. If you have the…

view full answer...

Answer 10

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 11

Your photo did not come through to us with your question, but we appreciate that effort! The Curt Custom Fit Vehicle Wiring Kit you referenced, part #C55245, is intended for vehicles that have the factory tow package installed. The connector that…

view full answer...

Answer 12

The 2 easiest ways to tell if your 2020 Toyota Highlander XLE has the factory tow wiring is to either check behind the paneling next to the 3rd row seating on the driver's side to see if a connector is there that the Curt #C56RV module plugs…

view full answer...

Trailer Hitch Receiver and 4-Way Wiring Harness For a 2022 Kia Sorento X-Line AWD

Products Featured in This Question

Continue Researching