Frame Mount Camper Tie Downs that Fit 1989 Ford F-250

Question

Question:

Looking for frame mount. Camper tie down brackets. To fit 89 ford F250 4 x 4. Look at the install manual

asked by: Ken W

0

Expert Reply:

For a set of frame mounted camper tie downs that fit your 1989 Ford F-250 we have the Happijac Camper Tie Downs # LC182910-182971 that would work great. I attached a link to the install instructions for you to check out as well.

expert reply by: Jameson C

0

Answer 1

Yes the tie down plates part #LC182876 that you referenced do fit your 1989 Ford F-250 since the correct part number tie down for your truck is #LC182910.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 6

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 7

Hi K, Thanks for your question. The TorkLift Tie Downs #TL87CR and #TLF3008 are not compatible with your 1997 Ford F-350. Those kits are designed for 2019 and newer Ford trucks. To determine the correct TorkLift tie-down kit for your truck, I'll…

view full answer...

Answer 8

Hey Chris congrats on the new truck! I did some research and the HappiJac Camper Tie-Downs item #LC236326-205221 is exactly what you need for your 2026 Ram 2500. I'm working on getting our website updated as we speak. This kit includes both front…

view full answer...

Answer 9

Hello Mel, great question! Yes, the Torklift tie downs part #TL66FV will fit your 2006 GMC Sierra 2500HD crew cab with the 8 foot bed, provided your truck does not have running boards or cab length boards that extend under the bed, and you are not…

view full answer...

Answer 10

Hi Adam, The Brophy Stake Pocket Mounted Camper Tie-Downs #TDSF don't technically have a weight capacity, though the turnbuckles they need, the Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs #TDHP, have a 3,000 lb weight capacity. So…

view full answer...

Answer 11

Hello John, Thanks for writing in. Yep, the Roadmaster Rear Anti-Sway Bar #RM-1109-167 will fit your 2005 GMC 3500 Duramax diesel dually, 4WD, extended cab with the 8-foot bed. It’s a confirmed fit for the 2001–2006 Sierra 3500 trucks, including the…

view full answer...

Answer 12

Unfortunately we do not have a video of the HappiJac Truck-Mounted Camper Tie-Downs #LC184089 being installed. The Rear anchors are installed in the end of the bumper. There is no precise mounting location since a variety of bumpers may be installed.…

view full answer...

Frame Mount Camper Tie Downs that Fit 1989 Ford F-250

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching