Replacement Hub for Spindle With 1" Inner Diameter Bearings
Updated 04/11/2022 | Published 04/10/2022
Products Featured in This Question
Question:
My back of hub to bolting surface measurement is 1 7/8, and the front of the hub to the bolting surface measures 1 1/2. My spindle is 1 straight. The measurement is 3 1/4. Thread depth is 3/4. Will this hub work? If not, do you have one that will.
asked by: ROBERT L
Expert Reply:
The # AKIHUB-545-2-G-2K uses # L44649 bearings with an inner diameter of 1.063" and also has a 5 on 4-1/2 bolt pattern. Since you need # L44643 bearings with an ID of 1" and a 4 on 4 bolt pattern the correct part would be the Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized # AKIHUB-440-2-G-1K. If you have an easy grease/EZ Lube axle then you would need the Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - Galvanized # AKIHUB-440-2-G-EZ-1K instead.
(click to enlarge)
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Idler Hub
- Standard
- L44649 / L44649
- Marine Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: hub seals
- Search Results: bearing buddy
- Search Results: trailer tires and wheels
- Search Results: bearing buddy caps
- Video: Review of Kenda Trailer Tires and Wheels - Tire with Wheel - KE44WV
- Search Results: trailer hubs and drums
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles - 4 on 4 - Pre-Greased - Threaded
- Shop: Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Q&A: Spindle Compatible With Trailer Idler Hub Assembly AKIHUB-440-2-1K
- Shop: Trailer Spindle Nut 1"
- Video: Feature Review CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles
- Shop: Kenda Karrier KR53 ST225/75R15 Radial Trailer Tire with 15" Silver Mod Wheel - 6 on 5-1/2
- Q&A: Changing from Oil Baths to Bearing Buddies on an EZ Loader Boat Trailer
- Q&A: Hub length of CE Smith Trailer 13110 and 13100
- Q&A: Replacement Hub Recommendation for Trailer with .99 inch Bearing ID Surface Dimension
- Q&A: Should There Be a Washer on Trailer Spindle Between Spindle Nut and Outer Bearing
- Q&A: Bearing Buddy Dust Covers for Bearing Buddy with 2.125" Outer Diameter
- Video: DIY Installation for the etrailer Galvanized Trailer Idler Hub Assembly for 2,000-lb Axles
- Shop: Replacement Bearing Buddy Bras - Model 19B - (Pair)
- Shop: Washer For 1" Spindle
- Shop: Loadstar 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel - 5 on 4-1/2 - Load Range C
- Q&A: Depth Measurement For Hubs That Fit A 1" Straight Spindle
- Search Results: short hub
- Article: Trailer Wiring Diagrams