Does The Fulton Swivel Jack F27CR Include All Hardware Needed For Mounting

Question

Question:

Does this jack come with the mounting bracket?

asked by: Chuck D

0

Expert Reply:

When it comes to The Fulton Bolt-Thru Swivel Marine Jack with Dual Wheels - Sidewind - Black - 12 inch Lift - 1,500 pounds # F27CR the mounting bracket is included. This jack will fit applications with a:

3 inch by 3 inch
3 inch by 4 inch
3 inch by 5 inch

The bracket height is 12-3/4 inches retracted, and 24-3/4 inches extended. It has a lift capacity of 1,500 pounds and has a clearance of 12-1/2 inches from mounting bracket to the top of jack. It is made from a heavy-gauge steel.

I attached a review video link below.

expert reply by: Noah E

0

Answer 1

I reached out to my contact over at Bulldog and when looking this they confirmed that the old Ranger trailers actually used a TJ650 style jack which they don’t make anymore. In that case we recommend replacing it with a new style jack next to the…

view full answer...

Answer 2

Hey James, I attached a picture that shows all of the dimensions of the mounting holes that are on the Fulton trailer jack part #F27CR that you referenced.

view full answer...

Answer 3

Trailer jacks are rated for the amount of tongue weight that the trailer has. Typically trailer tongue weight is around 10 percent of total trailer weight. So for a 1,500 lb jack to be at capacity the trailer would most likely weigh near 15,000 lbs.…

view full answer...

Answer 4

The rule of thumb for estimating a tongue weight is 10-15 percent of trailer weight. A 4,600 pound trailer would have a tongue weight between 460 and 690 pounds. Somewhere between a 1,000 to 2,000 pound capacity jack would be fine. Having a jack that…

view full answer...

Answer 5

A trailer jack onlys needs to be rated for the tongue weight (TW) of a trailer, not the entire gross trailer weight (GTW). With that being said, the tongue weight of a trailer is typically 10-15% of the gross trailer weight. Therefore your boat…

view full answer...

Answer 6

One way to determine the lift and jack height you need would be to measure the jack you currently have on your 2018 Intech Luna RV. If this is not possible, or you still aren't sure, you can also determine the correct jack using the coupler…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 12

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Does The Fulton Swivel Jack F27CR Include All Hardware Needed For Mounting

Featured Help Information

Miscellaneous Media

Continue Researching