Proper Procedure for Towing 2006 Jeep Liberty With Tow Dolly

Updated 03/30/2022 | Published 03/28/2022

Question:

I was wondering what to set the Jeep in when towing it, 2H or N? I would think 2H and then in park, key off. Correct?

asked by: Larry

Expert Reply:

When using a tow dolly like the Roadmaster Tow Dolly with Electric Brakes - 4,250 lbs # RM-2050-1 with your 2006 Jeep Liberty it is important to follow the procedure outlined in your owner's manual. These are the steps I found listed in the manual:

Use the following procedure to prepare your vehicle for recreational towing.

CAUTION! It is necessary to follow these steps to be certain that the transfer case is fully in N (Neutral) before recreational towing to prevent damage to internal parts.

1. Depress brake pedal.
2. Shift transmission into N (Neutral).
3. Shift transfer case lever into N (Neutral).
4. Start engine.
5. Shift automatic transmission into D (Drive) or manual transmission into any forward gear.
6. Release brake pedal and ensure that there is no vehicle movement.
7. Shut the engine OFF and place the ignition key into the unlocked OFF position.
8. Shift automatic transmission into P (Park) or ensure manual transmission is in any forward gear.
9. Apply parking brake.
10. Attach vehicle to the tow vehicle with tow bar.
11. Release parking brake.

I recommend checking your owner's manual to verify this information before you use your tow dolly. It is also worth noting that if you have a 2WD model recreational towing is not allowed.