Does Dummy Axle RKY1082 Fit RockyMounts DropTop

Question

Question:

Sorry, that was supposed to read droptop rocky mount.

asked by: Lia S

0

Expert Reply:

What do you mean used with the top?

expert reply by: Jameson C

0

Lia S.

3/30/2022

Sorry, that was supposed to read droptop rocky mount.

Jameson C.

3/30/2022

I see what you mean now. Yes, the Dummy Axle part # RKY1082 does work with the RockyMounts DropTop part # RKY57ZR that you referenced.

Answer 1

The base of the RockyMounts DropTop part #RKY57Zr measures 5-1/8 inch by 1-1/2 inch. Since RockyMounts is who rates this the correct capacity would be what they list as 45 lbs.

view full answer...

Answer 2

Yes, the RockyMounts DropTop Truck Bed and Utility Track Bike Rack #RKY57ZR is designed to work with both Toyota and Nissan's in-bed utility rails.

view full answer...

Answer 3

The Lippert Components Flip Down Slotted Bike Rack Tailgate Storage System #LC97HD is designed to be mounted on the bumper support arms of an RV so you can possibly install it on the 2004 Big Foot RV but it won't be compatible with your BMW X1.…

view full answer...

Answer 4

Hi Ray, With the Addmotor trike being over 100lbs there really just isn't s good solution here aside from towing a small utility trailer and mounting some fork mounts to the floor of the trailer for the bikes to secure to. Depending on the…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 8

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 9

Hello again Monty; I would get the black SumoSprings Custom Helper Springs #SS66PV. These have a capacity of 1,800 lbs so it gives you a bit over the blue without overdoing it. SumoSprings are a great choice if you don't want to go with the air…

view full answer...

Answer 10

Hello Barry, Since you already have a weight distribution (WD) hitch and are only experiencing a little rear sag, I recommend going with SumoSprings. I typically only suggest Timbrens for those who are towing heavy loads regularly, as they can create…

view full answer...

Answer 11

Hey Scott, congrats on the new truck. I checked with Timbren's website and they do not go into specifics on how many spacers or what size you're going to need. The instructions for the Timbren Suspension Enhancement System item #T45MR say to…

view full answer...

Answer 12

Hey Eric, the K-Source Tow Mirrors part #KS48NQ that you referenced will fit your 2025 Toyota Tundra Platinum as long as it doesn't have extendable or telescoping mirrors. What are you towing?

view full answer...

Does Dummy Axle RKY1082 Fit RockyMounts DropTop

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching