Troubleshooting Tandem Axle Trailer Leaf Springs Hitting Trailer Frame at Equalizers
Published 03/24/2022
Products Featured in This Question
Question:
I have rear leaf springs on the equalizer rised and rubbing on the frame on both sides. The trailer is level to the truck.
asked by: Roy P
Expert Reply:
It does look like you have shackle straps that are to long and possibly worn out bushings. You can replace your shackles with the 2-1/4" Shackle # LC122487. You will need 8 of these for the entire trailer. I would recommend pulling a couple of the Shackle Bolts # TRFA73Z916DLNZ to determine if they or the Nylon Bushings # TRBU11566 are worn and causing extra clearance which may explain if this is something that just started happening recently. You will need 14 of the bushings and 8 bolt sets if you want to go ahead and exchange them when you change the straps.
I recommend using the MORryde Suspension Upgrade Kit # MR46ZR which will come with all new shackles, wet bolts and bushings to give your trailer suspension better flex. You will be able to fill the bolts with Grease # L11390 to the bolts for a quieter and smoother ride.
(click to enlarge)
Product Page this Question was Asked From
Replacement Standard Shackle Link - 2-1/4" Long - Zinc - Qty 1
- Trailer Suspension Parts
- Shackle Links
- Boat Trailer
- Snowmobile Trailer
- 2-1/4 Inch Long
- Lippert
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: bk2 100 bearing kit
- Search Results: hub bearing kit
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double-Eye Springs
- Article: Double-Eye Trailer Suspension System Review
- Search Results: trailer hubs and drums
- Search Results: trailer brake controller
- Shop: etrailer Anti-Rattle Hitch Collar for 2" Hitch Receivers
- Search Results: sumosprings trailer
- Search Results: trailer leaf springs
- Shop: 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 25-1/4" Long
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Search Results: trailer suspension parts
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs
- Shop: Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 2-1/2" Front/Rear, 4-1/4" Center
- Video: Comprehensive Review: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers
- Video: Tandem-Axle Trailer Hanger Kit for Double-Eye Springs Review
- Q&A: Looking for Equalizer and Shackle Kit
- Video: Review of CE Smith Trailer Suspension Parts - Standard Equalizer - CES76WR
- Article: How to Accurately Measure Trailer Leaf Springs
- Video: etrailer Shackle Strap Replacement on a Utility Trailer
- Article: Where to Position the Trailer Axle?
- Video: An In-Depth Look at the LED Trailer Fender Clearance Light
- Q&A: Correct Replacement for 26-1/2 Long Leaf Spring
- Q&A: Replacement Suspension for a 2012 Keystone Outback 210 RS
- Video: etrailer Rust-Resistant 6-Leaf Double Eye Spring for 6K Trailer Axles Review
- Video: A Closer Look at the U-Bolt Plate for 2" Square Axle
- Q&A: Why Are Shackle Straps Hitting Frame When Re-Building Trailer Suspension
- Q&A: What Kind Of Bushings Does The CE Smith Triangular Equalizer CES86WR Have?
- Q&A: How to Determine Correct Suspension Kit For Tandem Axle Trailer
on Trailer Suspension Parts
