What Colors of Adco Tyre Guard RV Wheel Covers do You Carry for 18 to 22 and 24 to 26 Tires?

Question

Question:

Dose these covers come in other colors then tan? Thanks

asked by: Henry L

0

Expert Reply:

From your recent searches, I believe you are referring to either the tan Adco Tyre Gard RV Wheel Covers - Designer Series - 18" to 22" # 290-3965 or the Adco Tyre Gard RV Wheel Covers - Designer Series - 24" to 26" # 290-3964.

If you are referring to these wheel covers, we do carry different colors. However, the other colors are only available in sets of 2.

For the 18" - 22" covers:

- Black # 290-3975 (vinyl)
- White # 290-3955 (vinyl)
- Camo # 290-3655 (thermoplastic)
- Diamond plate # 290-3755 (vinyl)

For the 24" - 26" covers:

- Black # 290-3974 (vinyl)
- Diamond plate # 290-3754 (vinyl)

expert reply by: Bob C

0

Answer 1

Typically the 7th digit of a trailer VIN is the year the trailer was manufactured. I attached a picture that shows a VIN decoder for trailers for you to check out as well. You can also give the VIN to the trailer manufacturer and I am sure they will…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Hey Chris, Because the Thule TracRac TracONE Truck Bed Ladder Rack #TH27000XTB clamps to the lip of the bedrails it won't be compatible with any tonneau cover. You would need Thule's stake pocket mounted version the TracRac SR #TH43002XT-508…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

view full answer...

Answer 9

I have attached a chart you can check out that describes the torque needed per wheel size, wheel stud size and material. For an 8-inch wheel with a 1/2-inch wheel stud the torque is 75 to 86 ft-lbs. For a 15 inch steel wheel with 1/2 inch wheel studs…

view full answer...

What Colors of Adco Tyre Guard RV Wheel Covers do You Carry for 18 to 22 and 24 to 26 Tires?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching