How To Hook Up Generator to 100 Lb Propane Tank

Updated 03/21/2022 | Published 03/18/2022

Products Featured in This Question

JR Products Horizontal 2-Stage Propane Regulator

(115)

$61.98

MB Sturgis Propane Hose - 3/8" Male NPT x 3/8" Female Flare Swivel - 12'

(448)

$34.51

Question:

Hello, I would like to switch my 16k watt Generac whole house generator from a stationary propane tank to a 100 pound semi-portable horizontal tank. The length of the gas hose from the new tank to the generator will be around 10-12 feet. Could you advise which of your hoses and regulators I should get to accomplish this. Thank you,

asked by: Lou M

Expert Reply:

The propane regulator requirements will be specific to the generator, usually in the form of a BTU rating so you'll have to reach out to the manufacturer of your generator to see what they recommend. The Excess Flow 2-Stage POL RV LP Gas Regulator part # 37207-30375 will attach directly to a 100 lb propane tank and can flow up to 225,000 Btu's per hour. You could then use the MB Sturgis High Pressure Propane Hose part # 100040-144-MBS to direct the supply to the generator but you may also need an adapter for the generator side depending on what fitting it uses.

I have attached our regulator selection below as well if the above does not work.

expert reply by: Conner L