Could Americana Modular Wheel # AM22461 Fit 2019 Eby Roughneck

Question

Question:

Will this wheel fit on a 2019 Eby Roughneck with Dexter 10k single wheel axles?

asked by: Austin T

0

Expert Reply:

I was not able to pull up any wheel info on your 2019 Eby Roughneck but if your trailer has matching specs it could work. The trailer wheel # AM22461 is a 17-1/2 inch by 6-3/4 inch with a bolt pattern of 8 on 6-1/2 inch with an offset -.05 inch.

expert reply by: Jameson C

0

Answer 1

Hey Mark! Since you have 235/75R17.5 tires on there now you can use the Triangle 235/75R17.5 Radial Tire #TR32ZR as a spare. This keeps the tire size the same. I don't have a way of knowing if your current wheels have an offset since Grand Design…

view full answer...

Answer 2

Hi Robert! The 17-1/2" wheels are a bit more limited than other offerings, but I think you may be interested in the following two options: Americana Hub-Piloted Solid Center Wheel w -0.5" Offset - 17-1/2" x 6-3/4" - 8 on 6-1/2 -…

view full answer...

Answer 3

What is the width of the wheel? In order to determine what offset you have I would need to know the current width so I can see what your 4.5 inch dimension indicates. A zero offset means the hub face dimension is perfectly centered so I would need…

view full answer...

Answer 4

A Dexter 8k hub would have an 8 on 6-1/2 inch bolt pattern like what the part #TA45ZR has. This is also a 17.5 inch diameter trailer wheel. For a mod style wheel instead, we have the part #TA35ZR.

view full answer...

Answer 5

Trailer or automotive wheels can have a positive or negative offset. The offset refers to the distance between the mounting surface of the wheel that touches the hub and the center line of the wheel, as shown in the diagram I have edited for you. A…

view full answer...

Answer 6

I will level with you Dalton, we do not offer a wheel for your 2023 Chevy 3500 C&C. We deal mainly in trailer wheels, and the standard 8 lug trailer wheel is an 8 on 6-1/2" bolt pattern. I believe the 8-8.27 bolt pattern you mentioned is…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 11

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 12

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Could Americana Modular Wheel # AM22461 Fit 2019 Eby Roughneck

Product Page this Question was Asked From

Continue Researching