Replacement Bearing and Seal Kit for 3,500 lb Dexter Axle
Published 03/14/2022
Products Featured in This Question
Question:
Hello! Im looking to replace the axle bearings and seals on my Dexter 3500lb trailer axle. I have the stamped number on the axle but am unable to get any further information on it. Dexter Axle LN 181032962
asked by: Christopher S
Expert Reply:
The correct replacement bearing and seal kit for your 3,500 lb Dexter Axle is the Hub Bearing Kit # BK2-100 for the #84 spindle.
This kit comes with inner bearing # L68149, outer bearing # L44649, and a grease seal with a 1.719" ID and 2.565" OD so you can confirm on your end if you're needing to.
Attached is an installation video for you to check out.
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: wheel bearing kits for dexter 3500 lb axles
- Search Results: 5000 lb axle
- Search Results: trailer spindles
- Shop: Trailer Valet JX Trailer Jack - Welded Pipe Mount - Sidewind - Drill Powered - 1,800lb Lift Capacity
- Q&A: Replacement for Dexter Grease Seal 010-019-00
- Shop: Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Easy Grease Trailer Hub and Drum Assembly - 3.5K Axles - 10" Diameter - 5 on 5 - Pre-Greased
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 5 - Pre-Greased
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 5
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Shop: Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 3,500 lbs
- Search Results: bearing seal
- Search Results: vault
- Search Results: timken bearing for dexter 3500 lb axles
- Search Results: dexter vault
- Video: Review of Dexter Trailer Bearings Races Seals Caps - Bearings - DX58ER
- Video: Replacement EZ Lube Drive-In Grease Cap Feature Review
- Video: The Low-Down on the Grease Cap, 1.99" OD EZ Lube Drive in with Plug
- Q&A: Replacement Bearings, Seals, and Grease Caps for 3.5K Dexter Torsion Axles
- Q&A: Dust Caps Keep Falling Out
- Video: Ultimate Overview of the Replacement Spring for Ram Sleeve Lock Couplers
- Article: How to Choose a Trailer Hitch Coupler
- Video: Feature Review LubriMatic LMX Industrial Strength Grease
- Q&A: Method for removing and Installing Tang-Style Spindles Washers
- Q&A: My Axle Has No Cotter Pin Hole Can I Install Bearing Kit for #84 Spindle?
- Video: Review of Dexter Trailer Bearings Races Seals Caps - Bearing Kit - DX27UR
- Q&A: Torque Specs for 3500-lb 5-on-4-1/2 Dexter Hub/Drum 84546UC3
- Q&A: Replacement Bearing Kit for a Lippert 3,500 lbs Axle